Profile
News
Contact

Will-Burt Germany

Will-Burt Germany provides high-quality mobile mast systems and trailer solutions for military and security / rescue forces. They are used around the world: the armed forces of Germany, its NATO allies and other likeminded nations. Will-Burt Germany has progressively turned into a global player with subsidiaries and partners on every continent.

Customized Trailer Systems for Extreme Requirements

The object of Will-Burt Germany is the development, project planning, construction and system integration of our customized trailer systems. We carry out and follow your plan from A to Z. Special trailers for special tasks are our specialty. Many of our trailers are manufactured in small series. They are used by the German Army and other international forces. Our trailer systems are especially designed for missions involving extraordinary burdens in extreme and arduous terrain. High payloads in combination with low basic weights, maximum cross-country mobility, long life expectancy and low maintenance requirements are the characteristics of all Will-Burt Germany tactical trailers.

Range of Mobile Mast Systems

Our mast systems are used by international forces around the globe, including the German Army, to provide communications, surveillance, reconnaissance support etc. throughout the battlefield.

Man-portable Masts

The Expedition series (Ranger mast) is the lightest, most durable, rapid deploying, single man-portable field masts in the world. This system is equipped with lightweight payloads and can be deployed quickly by extending 1.2m sections to heights from 2.5m to a maximum of 18.3m. It’s our system for the ‘last mile’.

The AntennaMast AM2 model is a portable, lightweight, rugged, aluminum tripod mast designed for rapid payload deployment. The AM2 can raise multiple devices on an individual mast and is highly flexible and reliable. Users can lift and lower larger payloads in a secure way without disassembling the mast system by using the EZ Raze™ system and its safety brake and cable winching device. The mast tube lift winch supplies mechanical assistance for mast tube lifting for heavier payloads, and the mast tubes and payload can also be elevated by breach loading the tubes through the tripod center collar.

Mechanical Masts:

Telescopic crank masts KVL and KVR (also called cable pulls) are for payloads up to 70kg and heights up to 20m. They are suited for heavy communication systems, monitoring solutions, direction finder, target detection systems, etc. and used by the market leaders. These masts uphold their reputation through their robustness and simple operation. The extension and retraction of this mast type is realized through a retractable rope and a separate return rope. This guarantees a reliable operation independent of the weather conditions.

Spindle-Driven Masts:

The Spindle mast SPM is currently the best available mast system on the market. Grown against the hardest requirements, the SPM is specifically designed for use with large payloads and very high demands of accuracy. The retracting and extension occur through special spindle systems. A special honing procedure of the aluminum tubes and the use of high-precision spindles enables the manufacturing of nearly backlash-free telescopic spindle masts for heights up to 18m and payloads up to 600kg!

Lattice Towers:

The spectrum of lattice towers starts with the ITS Towers. ITS offers an innovative line of commercial-off-the-shelf (COTS) tower solutions from 11.5m to 32m. Will-Burt Germany lattice towers are customized solutions, mounted on trucks or trailers, for heights up to 45m and payloads up to 1000kg. Our giants!

One Company Initiative

The Will-Burt Company is pleased to introduce the One Company initiative, a program designed to ensure that we operate as One Team, guided by One Vision, representing One Brand – Will-Burt. This initiative formalizes our way of thinking and our passion to serve our customers. It was created to make it easier for our clients to engage with Will-Burt, no matter where they are or whomever they communicate with in our global organization. All locations have been renamed Will-Burt followed by their geographic location. For instance, GEROH, located in Germany, has been renamed Will-Burt Germany Gmbh & Co. KG. Company web sites will be consolidated under www.willburt.com and the GEROH social media platforms will be renamed Will-Burt Germany.

 

Contact

Make an Enquiry

We will protect your privacy - the data you provide on this contact form will only be forwarded to the intended recipient.

Contact Details

Will-Burt Germany
Fischergasse 25 91344
Waischenfeld
Germany

+49 9202-18-0

info@willburt.com

www.willburt.com

Profile
News
Contact

Will-Burt Company

The Will-Burt Company is the world’s premier manufacturer of telescoping masts for elevation of surveillance sensors, communications antennas and remote operated weapons systems. Will-Burt designs and manufactures a complete line of standard and custom-built telescopic masts using the finest materials, advanced engineering and quality testing to consistently deliver the world’s best vehicle, shelter and field deployed masts. Our products are designed and manufactured to meet MIL-STD-810 and are field proven in the harshest environments.

Telescopic Masts

Elevation Solutions for the Most Demanding Military Requirements

Warfighters rely on the dependability of Will-Burt telescoping masts and accessories world-wide. Reliable and durable, Will-Burt offers masts over 30m in height with payload capabilities of 816kg and drive systems from electro-mechanical, pneumatic and manual, providing the utmost in flexibility for our product to meet program requirements.

The Stiletto is a lightweight, compact mobile solution for applications requiring rapid automatic deployment, maximum reliability and high-directional pointing accuracy. Stiletto HD is available for enhanced precision and payload capability. The Stiletto AL delivers an extremely stable and compact elevation platform for sensors and antennas that require a high degree of pointing accuracy. This high-strength, alloy electromechanical telescoping mast with patent-pending automatic locks safely deploys payloads at any height.

Portable Telescopic Towers 

Rapid-deployment Portable Telescopic Tower Systems

The Will-Burt Company’s Integrated Tower Systems division is recognized as the world’s premier OEM-source for rapid-deployment Portable Tower Systems, Communication-Sites-on-Wheels/Light-Trucks (“COWS” and “COLTS”), and Mast-, Satellite- and Tower-Integrated Mobile Command and Communication Centers.  An innovative and extensive line of Commercial-Off-the-Shelf (COTS), customized and Military-Spec portable tower solutions support the emergency response, temporary and long-term communications, surveillance, test and other common and proprietary requirements of a global clientele.

When situations require higher payload elevation and/or heavier payload capacity, Integrated Tower Systems self-supporting telescopic lattice tower structures deliver the ultimate in performance. ITS towers can elevate payloads from 11.5 m to 32 m standard, and customized to 39.5 m.

Military Integration Services

Vehicle, Trailer and Shelter Elevation and Systems Integration

The Will-Burt Company engineers and integration specialists have the experience, knowledge and tools to successfully customize an integration solution for any vehicle, trailer or shelter. We also offer complete trailer integration solutions for a variety of platforms from military to commercial. A wide range of telescopic masts, portable telescopic towers, communications payloads, power sources and sensor systems can be integrated and optimized to provide the most efficient and seamless solution for your specialized needs.

Supported by a full line of tilt and gimbal systems, rapid metal and composites fabrication and a state-of-the-art paint line, an integration solution can go from design to manufacture to installation in a very short amount of time. Whether off-the-shelf or customized, The Will-Burt Company will deliver an integration solution that will meet the most complex requirements.

Military Trailers

Light and Medium-Weight Tactical Trailers

The Will-Burt Germany family of Light and Medium-Weight Tactical Trailers is used by the German Army and other international forces to enhance mobility and logistics capabilities throughout the battlefield. These trailer systems are especially designed for missions involving extraordinary burdens in extreme and arduous terrain.

Will-Burt Germany’s development department can fulfill the special requirements of military customers. Military specifications are met by delivering high-capacity standard solutions as well as special customized trailer systems.  Close cooperation with many international forces and procurement agencies makes it possible to define and to offer the best possible solutions. High payloads with low basic weights, maximum cross-country mobility, long life-expectancy and low maintenance requirements are the characteristics of all Will-Burt Germany Tactical Trailers.

One Company Initiative

The Will-Burt Company is pleased to introduce the One Company initiative, a program designed to ensure that we operate as One Team, guided by One Vision, representing One Brand – Will-Burt. This initiative formalizes our way of thinking and our passion to serve our customers. It was created to make it easier for our clients to engage with Will-Burt, no matter where they are or whomever they communicate with in our global organization. All locations have been renamed Will-Burt followed by their geographic location. For instance, GEROH, located in Germany, has been renamed Will-Burt Germany Gmbh & Co. KG. Company web sites will be consolidated under www.willburt.com and the GEROH social media platforms will be renamed Will-Burt Germany.

 

Contact

Make an Enquiry

We will protect your privacy - the data you provide on this contact form will only be forwarded to the intended recipient.

Contact Details

Will-Burt Company
401 Collins Blvd
Orrville, OH 44667
Ohio, 44667
United States

+1 330 684 4000

dcotsmire@willburt.com

www.willburt.com

Profile
Videos
Contact

Comrod Communication Group

Comrod Communications Group design and manufacture military antennas and antenna systems, tactical support masts, military power supplies and battery chargers to the defence communications market.

Military Vehicle Antennas

The Comrod range of military vehicle antennas are designed for use on modern in-service platforms including armoured or soft skin, metal chassis or composite, wheeled or tracked.

Tactical antennas cover the military frequency bands of HF, VHF, UHF and L1/L2 GPS.  Comrod also has an extensive range of wideband and multiband antennas covering both VHF and UHF in the 30-2500 MHz band. 

High power antennas are available which are suitable for both military communications and IED jamming applications.

Military Manpack Antennas

The Comrod range of tactical manpack antennas are suitable for handheld and man-portable applications covering HF, VHF and UHF frequency bands (1.6MHz to 2500MHz).

Consultation with Radio OEMs and users enables us to optimise the product to meet the customer’s specific requirement.

Manpack antennas can be supplied using helical, tape or folding whip construction and are available with a flexible gooseneck or spring assembly and antenna matching unit (AMU). 

Variants are also available with integrated GPS antennas.

Tactical Base Station Antennas

Comrod has an extensive range of tactical ground and remote antennas covering the HF, VHF and UHF frequency bands up to power ratings of 1KW.

The military specification HF ranges of products include omni-directional antennas with ground planes and HF broadband wire dipole antennas covering 2-30MHz.

In the VHF band we have elevated omni-directional end fed antennas with ground planes as well as elevated centre fed antennas.

For directional point to point and line of sight communications we have log periodic antennas in the 30-88MHz and 30-512MHz bands and for wide area networks we have a radio relay antennas covering band 1, band 3+ and band IV frequencies in both grid and dish configurations.

All tactical base station antenna products can be supplied with adaptors to fit the Comrod series of military support masts.

Telescopic, Sectional and Sleeve Masts

 

Comrod has a complete range of tactical support masts from lightweight manpack up to heavy duty motorised versions. The tactical man-pack mast range is simple to erect, cost effective and ideally suited for light omni-directional and wire antennas up to 9metres in height. The ULM and MLV sleeve tripod masts are primarily ground mounted systems ideally suited for heavier head loads, elevating tactical base station antennas including line of sight antennas up to 40metres. 

The composite telescopic push up mast series can be used to elevate light head loads up to 12 metres and be ground or vehicle mounted. The pneumatic telescopic mast series is constructed of aluminium sections and is erected using a foot-pump or compressor. It is ideally suited to supporting our tactical base station antennas up to heights of 18 metres.

The winch driven composite telescopic mast series is suited to supporting heavier head loads up to heights of 34 metres.
This series can be ground mounted or vehicle mounted using vehicle specific brackets.

Military Power Supplies and
Battery Chargers

The Comrod range of power supplies and battery charging products have been designed and manufactured using state of the art technology and fully meet Mil Std/EMC/TREE requirements.

The product range covers chargers for handheld radio batteries up to vehicle installed stabilised power supplies for sensitive electronic equipment.

The Comrod range of rack mounted power supplies are designed for optimum adaptation to weak power sources such as portable generators.

Military Shipboard Antennas

Comrod has a large range of antennas specifically designed for use on military marine craft ranging from rigid inflatable’s up to large naval vessels operating in the HF, VHF and UHF bands. 

Contact

Make an Enquiry

We will protect your privacy - the data you provide on this contact form will only be forwarded to the intended recipient.

Contact Details

Comrod Communications ASA
Fiskaaveien 1
N-4120 Tau
Norway

+47 5174 0500
+47 5174 0501

drm@comrod.com

www.comrod.com

List Your Company Design Agency