Kejo Limited was founded in 1997 in Florida and quickly established itself as a key supplier of body armor to level IV (NIJ), bomb and ballistic blankets, EOD bomb disposal suits, de-mining equipment, shields and helmets under its registered trade mark Kejo ® to the US Army, US Navy, Marines and the US Air Force. It's staff have over 30 years of experience in the business and upon request, Kejo can custom make bomb and ballistic resistant products including vehicle protection and even helicopter floor ballistic protection to your specifications.

Kejo™ Saviour™ EOD Bomb Disposal Suits

The KEJO™ Saviour ™ EOD Bomb Suit is designed to offer the maximum protection with the minimum weight making it one of the world’s most advanced high-performance cost-effective suits available. The suit aims to be the most comfortable and flexible suit available offering the highest levels of protection against blast threats. The latest material technology is used to keep the suit as flexible and as comfortable as possible whilst maintaining the highest levels of integrated protection . The suit can also be quickly donned without special assistance and incorporates a quick release system for the rapid removal of the suit.

Click here for more information about the Kejo™ Saviour ™ EOD Bomb Disposal Suit.

Kejo™ EOD Tool Kits - Non-Magnetic MRI Maintenance Tool Kit, Universal Field Service Tool Kit, 1000 Volt Insulated Tool Kit

Kejo's Custom Made EOD Tool Kits are designed with the ultimate protection and safety in mind and are excellent value for money. The Non-Magnetic MRI tool kit is built for Biomedical Service Technicians working on or near highly magnetic MRI equipment. The Non-Sparking, Non-Magnetic (3-Tesla Safe), Corrosive Resistant tool kit comes neatly packaged in a hard sided plastic tool case with a custom foam tool controlled interior. It is safe for use on GE, Siemens and Philips MRI equipment. The Universal Field Service Tool Kit is a general purpose tool kit which is ideal as a Field Service Starter Kit and is designed with Field Service Engineers, Electronics Service Professionals, Computer Repair Technicians, Biomedical Repair Specialists and On-site Service Technicians in mind. Kejo has assembled the Metric 1,000 Volt rated Insulated Tool Kit to protect people, property and productivity. Double insulation provides a visual cue for tool failure. If the yellow shows through don’t use the tool near voltage!

Click here for more information about the EOD Tool Kits and Tools.

Kejo™ EOD Helmets, EDU Explosive Disruption Shields, Tactical EOD Suit, IEDD Search Suits

The Kejo EOD bomb helmet incorporates the latest materials technology and moulding techniques to provide a helmet that is not only ballistic superior but also shaped to fit the wearer’s head. It is also designed to fully integrate within the collar of the suit without impeding the lateral and rotational movement of the head. The EDU shield has been developed for use by explosive disposal and tactical teams to offer maximum over pressure and fragmentation protection during explosive disposal operations. The EDU is equipped with removable spring-loaded legs. In the stowed position, the legs hug the edge of the shield for easy storage and manoeuvrability. One easy motion releases the support legs into the deployed position, allowing the shield to be self-supporting. The Kejo Search Suit was designed for personnel involved in searching for and clearing of explosive devices, and has been developed to meet the specific needs of a search team. Although the suit is significantly lighter than the standard EOD Bomb Disposal Suit, it provides the user with all round protection, unmatched mobility and virtually unrestricted movement. The outer garment of the suit is constructed out of Nomex III and includes the latest Kevlar New Technology Fibers. Kejo can also supply a wide variety of EOD tools and accessories for any bomb disposal applications.

Click here for more information about EOD Equipment. 

Kejo™ Body Armor  – Military Assault Vests, Bullet Proof Vests

All of Kejo's Military and Police Body Armor is designed to meet the stringent specifications and application needed by Law Enforcement; The Kejo™ Military Assault Vest, Level IIIA, with front, back and side ballistic protection is designed as a high-mobility front opening vest to be worn over a soldier’s uniform. It protects to the National Institute of Justice (NIJ) IIIA level. The Kejo™ US PASGT is a jacket style vest ideally suited for use by military or riot police. The vest provides complete protection for the front, back and sides as well as the neck. The Kejo ™ Special Forces level IIIA (NIJ) is designed and manufactured to meet the needs of elite forces of the military and police. This light tactical vest with attached collar provides full front, back and side coverage and for additional shoulder coverage the padding can be removed and ballistics can be added.

Click here for more information regarding Military Body Armor.

Kejo™ Military and Law Enforcement Tactical Vests - SO-TAC Vest Special Ops Level IIIA, Light Tactical Vests, Executive Body Armor

All of Kejo's Tactical Body Armor Vests provide full tactical coverage without restricting movement. The SO-TAC is the perfect complement to your Special Ops mission. Designed with today's modern warrior in mind, this vest can be geared up to perform. Providing full front, back and side coverage this vest is designed to balance the weight of the ballistics and provide comfort for the end user. The Kejo Grizzly Comfort Cut Level IIIA - Light Tactical Vest provides the mobility and comfort of a concealable in a tactical vest. This light tactical vest provides full front, back and side coverage and is great for tactical missions where a throw-over could be used or full gear (i.e. groin, biceps, and collar) is not required. Available in level II or IIIA ballistic packages. The Kejo™  Execuvest has been designed as a discrete overt armour vest, providing full front, back and side ballistic protection. Ideal for VIPs ,Businessmen and Bodyguards. The vest that looks like a harmless waistcoat but dont be fooled by its ballistic capabilities.The ideal protection for professionals and businessmen.

Click here for more information about Tactical Vests.

Kejo™ Custom Bomb and Ballistic Blankets – Various Sizes Level IIIA, Level IIA and Level II (NIJ) Bomb and Ballistic Blankets

All of the Kejo Bomb and Ballistic Blankets meet the various levels of protection stated and offer fragmentation protection for use in IED/EOD operations. All are made to Stanag standards and are manufactured with Kevlar Aramid to provide the ultimate protection.

The Humvee Bomb Blankets protect vehicles from blasts and ballistic threats. These blankets are made to order with price upon application.

Click here for more information about the Kejo Bomb and Ballistic Blankets.

BiP Solutions was established in 1984 to facilitate business between the public and private sectors.

Defence Contracts Online

Through a 16-year partnership with the UK Ministry of Defence (MOD) as official publishers of their contract information, BiP provides a range of defence-specific products and services to assist private sector businesses to successfully compete in the defence marketplace.

MOD Defence Contract Information Services

MOD Defence Contracts Online (DCO - www.contracts.mod.uk) is the official online source of UK Ministry of Defence contract opportunities, giving private sector suppliers access to all UK MOD contracts of all values, in one place. Access to MOD DCO is completely FREE and registered suppliers can search for contracts 24/7.

By registering for free and entering keywords/phrases into their unique supplier profile, registrants will also receive tailored daily email alerts directly to their inbox containing the latest UK MOD contracts that match their defence product and service offering.

The aim of the MOD Defence Contracts Online service is to guide organisations through some of the steps they will need to follow to sell to the UK Ministry of Defence, while providing a gateway to new contract opportunities for both large and small organisations wishing to compete for defence business, either directly as a prime contractor or indirectly as a sub-contractor.

To register your business today, visit www.contracts.mod.uk and follow the simple supplier registration process.

Defence Contracts Bulletin

Published in association with two key UK Ministry of Defence procurement agencies – Defence Equipment and Support (DE&S) and the Defence Infrastructure Organisation (DIO) – MOD Defence Contracts Bulletin (MOD DCB) is read by organisations that are serious about engaging effectively with the UK MOD as a supplier, as well as by the UK MOD’s own buying community.

Through this fortnightly publication, readers gain access to a wealth of UK MOD contract opportunities and key defence market intelligence, including:

• All UK MOD contracts valued above £10,000;
• A unique insight into the UK MOD’s spending plans;
• The UK MOD’s ongoing and upcoming equipment projects;
• Future UK MOD requirements;
• UK MOD procurement policies;
• Key defence industry analysis and features;
• Exclusive interviews and commentary from key UK MOD and defence personnel.

Defence Contracts International

Defence Contracts International (DCI) is the premium source of information on defence contract opportunities and a world leader in providing key defence and security contracts in the UK, Europe and worldwide.

Our dedicated business intelligence research department search over 400 independent sources every day, and we receive direct feeds from the Official Journal of the European Union (OJEU) and Fedcon to provide unrivalled defence contract information that keeps your business on top of what’s happening in global defence markets.

Defence is one of the world’s most lucrative industry sectors, with thousands of defence and security contracts published each year. With a DCI subscription, you can also enjoy direct access to contracts from other related sectors, such as:

• Homeland Security
• Humanitarian Aid
• Counter Terrorism
• Emergency Services
• Aerospace
• Aviation

Access to these further defence-related contract opportunities will undoubtedly allow you to further expand your business within existing and new defence marketplaces.

Other key benefits from having a DCI subscription include:

• Your own interactive dashboard, allowing you to flag contracts of interest and track opportunities for tendering;
• A unique supplier profile, tailored to your exact needs to ensure you receive only the most relevant opportunities;
• Daily email alerts containing the latest contracts published, along with live alerts for new contracts published throughout the day – keeping you at the forefront of new opportunities;
• Dedicated Account Management throughout your subscription year*, providing the best service possible and ensuring you receive maximum return from your investment;
• A gateway to further contract opportunities of a similar nature, from non-defence buyers.

DCI is ideal for organisations of all sizes, from SMEs seeking defence business opportunities in their own regional areas to major multinational players looking to capture as large a share as possible of the global defence market.

Annual subscriptions start from as little as £280 per year.

To find out more about how Defence Contracts International can help your business grow, simply visit www.dcicontracts.com today, or to speak with a Defence Business Growth Advisor call 0845 270 7092. We’re open 9am to 5pm, Monday to Friday.

*Our Account Management Team fully support subscriptions over the value of £500 only.

Defence Procurement Events and Exhibitions

BiP Solutions also delivers a range of defence-focused exhibitions and training events throughout the UK each year.

The Defence Procurement Research, Technology and Exportability 2013 exhibition is a one-day event that will showcase innovative defence procurement for buyers and suppliers.

Taking place on Wednesday 20 November 2013 at the University of the West of England Exhibition and Conference Centre, DPRTE 2013 will provide the buyer and supplier communities with a unique opportunity to interact across a single platform in order to enhance effective collaboration and competition in all areas of defence research and technology.

Delegates will discuss the future shape of the defence sector, as represented by:

• Defence Agencies
• Central Government
• Academic Institutions
• UK MOD Project Teams
• European Partners
• Prime Contractors
• 1st and 2nd Tier Sub-Contractors
• SMEs and Micro SMEs

Exhibiting suppliers will enjoy:

• Promoting their capabilities to over 1000 buyers as well as end users;
• Identifying opportunities to transfer technology into new markets;
• Exploring international markets;
• Identifying potential partners and funding opportunities;
• Engaging with academia to understand the latest technology concepts.

For more information on this unique and innovative showcase event, visit www.dprte.co.uk

Our Procurement Advice and Support Service (PASS) is the training arm of the business and delivers a Selling To Defence workshop in various UK locations.

The one-day workshop aims to inform delegates of the vision for the future of UK defence and the implications of the ongoing changes within UK MOD procurement, including the recently announced ten-year equipment spending plan, with the ultimate goal being to assist delegates in developing their strategy and defining processes to win business within the defence sector.

Topics covered include:

• Understanding the UK Procurement Regulations;
• Selling to Defence – the UK MOD’s Perspective;
• Defence and Security Exporting – Support for Small Businesses:
• The Do’s and Don’ts of Tendering

The event is fully supported by the UK MOD, with dedicated speakers from Defence Equipment and Support (DE&S) as well as the UK Trade & Investment Defence & Security Organisation (UKTI DSO).

To find out more about the Selling To Defence workshop, as well as dates and venues, visit www.passprocurement.com/events

Iveco Defence Vehicles is a brand of CNH Industrial N.V., a World leader in Capital Goods listed on the New York Stock Exchange (NYSE: CNHI) and on the Mercato Telematico Azionario of the Borsa Italiana (MI: CNHI). Iveco Defence Vehicles is dedicated to delivering innovative automotive and protection solutions to meet the needs of military customers worldwide.

The company manufactures specialist logistic, protected and armoured vehicles in its facility in Bolzano in Northern Italy, as well as marketing Iveco's full commercial range, adapted as necessary to meet the demands of the military user. In consequence, Iveco Defence Vehicles has a full range of vehicles to meet a broad spectrum of defence applications.

Iveco Defence Vehicles has a full range of vehicles to meet a broad spectrum of defence applications.

Modular Designs Provide Outstanding Mobility,
Protection and Payload

Iveco DV’s range of Multirole Vehicles, Tactical and Logistic Trucks, and Armoured Fighting Vehicles covers the full spectrum of on- and off-road military requirements and represents a well thought through, comprehensive and effective response to the needs of the military customer.

Iveco DV’s engineers have exploited the modular approach adopted in our commercial range to provide direct benefits to the military user.  This philosophy allows the solution to be tuned as closely as possible to the identified needs of the user without time-consuming re-engineering.

The whole product range is subjected to a continuous development process under which evolving needs are fed back to our engineers, who, in turn, develop a steady stream of enhancements in terms of payload, mobility and protection.

SUPERAV – A New Generation of Amphibious Armoured Vehicles

Iveco has developed the 25-tonnes SUPERAV 8x8 Medium Armoured Vehicles family specifically to undertake amphibious operations.  All variants share the same innovative multi-layered hull design.  This approach combines advanced materials with leading edge technologies, and provides exceptional levels of vehicle and crew survivability without compromising amphibious performance. Thanks to its modularity and the ease with which it can be reconfigured, the SUPERAV 8x8 can be air-transportable, is capable of maritime operation beyond Sea State 3, and can mount weapons up to 30mm calibre.

The Centauro 8x8 Armoured Vehicle Family

The 26 - 30 tonnes combat proven Centauro family of wheeled 8x8 armoured vehicles is designed for land operation and can be adapted to meet a wide variety of roles.  Many variants are already available, and, of these, the Centauro 120mm MGS ‘tank-on-wheels’ is today’s fastest and lightest vehicle equipped with a 120mm gun – and the only wheeled one existing.  This vehicle is also available mounting a 105mm gun.

The Centauro VBM Armoured Personnel Carrier (APC) and Armoured Infantry Fighting Vehicle (AIFV) feature a hull specifically designed to maximise crew survivability. With an inner volume of about 11m3, the AIFV is equipped with a 25/30mm two-man turret and can accommodate a driver and 8 fully equipped dismounts, while the APC offers 14 m3 and can carry up to 12 dismounts.

The Centauro family is offered through CIO Iveco – Oto Melara, a joint venture with Oto Melara of Italy who are responsible for providing the turret systems.

Multirole and Mission-Adaptable Vehicles

Iveco has focused on the development of multirole platforms which are capable of fulfilling a range of applications.  Characterised by their exceptional mobility, agility and terrain accessibility, and their high levels of protection against both ballistic and mine attack, this range of vehicles is based on two platforms – the Light Mulitrole Vehicle (LMV) and the Medium Protected Vehicle (MPV).  With a wide variety of configurations already developed, they are equally effective on peacekeeping, counter insurgency and war fighting missions.

Light Multirole Military Vehicle

The LMV is a purpose built military vehicle which nonetheless benefits from the use of many commercial components.  Rugged and highly mobile, it is based on a modular design which enables the development of a wide range of variants with differing wheelbases, roofs, crew cell configurations and protection levels.  This modularity accommodates many configurations, most recently, a special forces variant.  The LMV is rapidly becoming the light protected vehicle of choice in Europe, with sales to nine armies to date.

Medium Protected Vehicle (MPV)

The multirole approach is also seen in the MPV which Iveco has developed in partnership with KMW.  To meet the demand for heavily protected utility and multipurpose vehicles able to provide high levels of ballistic, mine and IED protection, the new 4 x 4 MPV family occupies the mission space between the LMV and the Centauro 8 × 8 AFV family.

In order to produce a reliable, rugged, well protected vehicle with a class leading payload, Iveco took the decision to exploit its highly successful Trakker chassis.  Innovative well informed engineering coupled with a class leading commercial chassis has delivered a well protected, adaptable vehicle with high mobility at a cost far below that of bespoke military vehicles.

A Logistic Capability for both Protected
and Unprotected Applications

One of the characteristics of current operations is that there is no front line.  In recognition of this, Iveco Defence Vehicles has developed a class leading protected cab which can be fitted to Iveco’s heavy duty 6×6 and 8×8 Trakker chassis.  The result is a robust, highly mobile but cost effective logistic vehicle which can operate even in high threat areas.

The modular design of the Trakker range provides a choice of a wide range of wheelbases and drive trains, all of which are supportable through the Iveco dealer network.  This enables Iveco to provide a highly versatile, exceptionally well protected logistic fleet to meet a wide range of demanding roles.

Purpose Designed Military Trucks
for Specific Operational Requirements

IVECO Defence Vehicles also offers a full range of battle proven, powerful and capable 4×4, 6×6 and 8×8 purpose designed military logistic vehicles to provide tactical support to any military operation in the most hostile environmental conditions.  The vehicles can be fitted with a cab which allows them to be airportable in a C130.

The whole range can be equipped with a new generation of add on armour kit, achieving a unique combination of performance, payload and protection to support any military operation in the most hostile environmental conditions.

Spray Applied Force Protection

PAXCON [PX-3350], developed by LINE-X is an advanced spray applied polymer coating formulated to mitigate the effects of a bomb blast.

The Effects of Blast Mitigation

PAXCON is sprayed on the exterior and interior of the supporting walls and is touch dry in seconds. During a bomb blast PAXCON mitigates the effects of the explosion by providing a flexible liner that absorbs the force of the blast and holds the fragmented wall together.

PAXCON has been put through extreme testing by the Air Force Research Laboratory. Testing involved 9’x9’ panels, one uncoated and the other coated with PAXCON which were exposed to bomb blasts at a distance of 35ft. The PAXCON coated panel survived this test whilst the non coated panel disintegrated as a result of the blast.

Futher tests constructed by the Air Force research lab provided evidence that walls coated in the PAXCON material can reduce the stand off distance by over 50%.

The tests also indicated that PAXCON was the only coating that passed all bomb blast testing out of the 27 coatings that were tested.

After the 9/11 attacks in America LINE-X developed PAXCON to help protect current and future assets from attack.

The US Pentagon was one of the first major Government buildings to specify PAXCON “to protect the Pentagon against potential impacts and bomb blasts.”

Blast Resistant Coatings Protecting Military, Civilian and
Government Buildings

PAXCON coatings are currently protecting military, civilian and government building across the globe. Applications can include underground car parks, banks, large postal offices, airport baggage handling centres and new architectural projects.

PAXCON can also be specified  for new builds and applied during the construction of the site. Once the structural walls have been built, PAXCON applicators go on site to spray the polymer coating onto the prepared wall. With rapid touch drying time of only a few seconds PAXCON does not hold up the construction process of the site. Once the coating has been sprayed, the carpenters, builders and plasterers can carry on with their duties almost immediately.

LINE-X Protective Coatings Ltd also have a structural and masonry retro fit program where existing buildings/structures can have PAXCON applied to the substrate of the supporting walls, making them resistant to particular forms of bomb blast.

The retro fit program includes PAXCON being applied to lightweight structures such as plywood panelling and timber stud walls as well as heavyweight masonry structures made from brick or blockwork.

PAXCON polymer coatings will adhere to most well prepared substrates including wood, steel, fiberglass and dyneema.

PAXCON Provides Anti-Terror Protection

PAXCON Blast Mitigation is an integral part of security planning. When security fails to prevent acts of terrorism PAXCON is there to save and protect targeted assets from terrorist attempts. PAXCON should be integrated into your anti-terrorism package to protect your assets when other preventative measures have not succeeded.

Enhanced Polymer Coatings for Ballistic Protection

Blast Mitigation is one of many coating solutions provided by LINE-X Protective Coatings Ltd. LINE-X Spall Liner [PX-2100] is a spray applied coating that absorbs the impact from projectiles preventing both the projectile and the armoured plating from creating spall.

Spall is the name given to fractured elements from a projectile or armoured plating that occur when that projectile impacts at high speed with the armoured plating. These fractured elements when dispersing are the cause of a large volume of injuries to many of our soldiers.

The flexibility and absorption that LINE-X Spall Liner offers when applied to armoured panels eradicates the splintering effect by cushioning the impact and entrapping the fractured elements.

Impact Absorbtion Qualities

The LINE-X spall liner has been engineered from specially formulated polymers to allow a certain degree of flexibility and durability to be able to absorb the impact from high speed projectiles when coated onto armored panels.

These advanced polymers have allowed the LINE-X to produce a spray-on Spall Liner for armoured vehicles to be used in conjunction with Dyneema and similar armoured panels which is significantly lighter and more cost effective than armouring with steel plates.
Other Spall Liner applications include the coating of Breastplates and Gun Turrets. LINE-X Spall Liner is currently being used on both the strike side and reverse side of Dyneema, Ceramic and Armour Plated panels.

Advanced Armoured Vehicle Coatings

LINE-X applications are being specified and carried out on several military and ‘blue light’ fleets due to the many advantages LINE-X coatings have to offer.

The ballistic properties are obviously one of the key attractions of the LINE-X Spall Liner material, which is able to provide advanced, lightweight  armoured protection at a lower cost to the usual methods of up-armouring vehicles. This coating also offers plenty of hidden gems including rust and corrosion prevention, resistant to most chemicals; it is easily maintained, and offers a non-skid surface.

Military vehicles operate in harsh and rough terrains, which have a tendency for rocks, stones and debris to be thrown up causing damage to the vehicle. The superior durability of the LINE-X range of coatings have lead to many military fleets adopting LINE-X as their choice of protective coating, in order to prevent exactly this type of damage from occurring.

UK “Blue Light” fleets have started to adopt the LINE-X coating as a Van Liner for the added protection of preventing projectiles such as scaffold poles being forced through the standard metal side panels of the van as well as providing a non-skid surface that is easily jet washed back for cleanliness.

The company’s range of service offerings include; Business Winning & Proposal Generation, Project Mobilisation, Control & Delivery, Systems & Software Engineering, Supportability Engineering, Support Solution Design Service, Safety Engineering & Assurance, Training Analysis, Design & Delivery, Human Factors, Operations Analysis & Modelling and Cyber Security.

Persides

Persides is an established and growing force in the defence, security and energy markets offering high calibre services for a diverse client base.

It is increasingly difficult for an organisation to predict exactly the skills and capacity it needs to deliver its dynamic and evolving objectives. Persides offers high quality management and engineering services to supplement client capability and enhance performance where required. Services offered include;

• Business Winning & Proposal Generation
• Project Mobilisation, Control & Delivery
• Systems & Software Engineering
• Supportability Engineering - Integrated Logistic Support (ILS), Reliability & Maintainability
• Support Solution Design Service
• Safety Engineering & Assurance
• Training Analysis, Design & Delivery
• Human Factors
• Operations Analysis & Modelling, Whole-Life Cost (WLC), Life Cycle Cost (LCC)

Persides has built its reputation on the foundations of a core set of principles which align to an approach of delivering Value, Trust, Excellence in support of our Customers. Persides provides a multi-layered approach to the way it contracts its services. Understanding the constraints faced by our clients, whether they be finance or policy driven, Persides tailors its’ offering to counter these constraints and is always prepared to share risk and accountability.

Our Key Products and Services include:

Key Land Based Equipment Programmes

• CBRN  - DE&S /Industry

Persides staff have directly developed various ILS deliverables including the ILS Strategy, ILSP, SOW, Use Study for Man-Portable Chemical Agent Detector (MCAD), Lightweight Chemical Agent Detector (LCAD), Collective Protection Chemical Agent Monitor (COLPRO CAM), Integrated Biological Detection System (IBDS), Maritime Biological Detection System (MBDS) and the Aircrew Protection Equipment and Detection (APED) programme.

• WCSP – DE&S

Medium Armoured Tracks Team (MATT) Warrior Capability Sustainment Programme (WCSP) – R&M Analysis: Persides conducted an independent review to re-evaluate and verify current MoD reliability figures from the WCSP System Requirements Document (SRD) and develop a generic WCSP reliability model to inform potential future requirements.

• PECOC DE&S

Personal Equipment and Common Operational Clothing (PECOC) for the UK MOD Defence Clothing Integrated Project Team (DC IPT) – Persides were responsible for the development of the ILS deliverables in particular in the ILSP, Use Study and the SOW. The aim of this Use Study was to provide an overview of the PECOC programme and the current logistic management and sustainment of the existing Combat Soldier (CS) 95 system.

• FIST - Future Integrated Soldier Technology - Thales Land and Joint

Persides worked as a Future Integrated Soldier Technology (FIST) tier one partner within the Thales Prime Contract Management Office (PCMO) during the Assessment and Delivery phases of the core programme and numerous Urgent operational Requirements (UORs).  Persides was responsible for the definition and delivery of the Support Solution with a particular focus on implementation of Operational Availability-based solutions.
Persides has conducted ILS programmes, developing and delivering support solutions for a number of FIST procured equipment’s. In addition to our work within the PCMO, we have provided support to suppliers of equipment into the FIST programme including Vectronix-Wilcox, Shield and Qioptiq.

Services:
Business Winning and Proposal Generation

Persides has a proven track record of winning and delivering defence and security programmes on behalf of a range of suppliers from small businesses to large multi-national prime contractors. Our expertise in business capture, bid management and programme delivery will ensure that you set out with a winning strategy that ensures a high probability of winning tenders and subsequently delivering profitable programmes to cost, time and performance.

Whatever the stage of the acquisition lifecycle, Persides has vast experience across all domains of programme delivery. We will assist you in making your bid strong in every area, and ensure that your buyer has high confidence in your ability to meet and even exceed their expectations.

Military Systems and Software Engineering

We have gained our wide engineering experience through participation in and management of multiple hardware, software and integration programmes where our staff have been fully committed to the delivery of innovative solutions in support of our customers. Our engineering capabilities include:

• Requirements and System Architecture development
• Software code development and verification
• Systems Integration
• Verification and Validation of both Hardware and Software programmes

Supportability Engineering

Persides has an extensive depth and breadth of capability and experience which enables the successful management and execution of Supportability Programmes. Our Supportability Engineering /ILS capability includes the following disciplines:

• Contractor Logistic Support
• Availability and capability contracting solutions
• Support Solution performance based modelling and simulation
• CONDO Management
• Supportability trade-off analysis
• Technical Documentation

 Support Solution Design Service

Persides has established a structured and proven approach to the design of support service solutions. The approach minimises likely exposure to potential risks and increases the likelihood of meeting contractual service and availability requirements. The approach combines service sector good practice techniques with Model Based Systems Engineering (MBSE). The activities within this approach are tailored to suit project specific needs and applied by Persides consultants working closely with client organisation personnel. Example activities include; Stakeholder Analysis & Management, Value Proposition, Requirements Analysis & Modelling, Behaviour & Functional Analysis, Qualitative and Quantitative modelling, Structured Solution Design and Solution Test & Acceptance.

Safety Engineering and Assurance

Persides recognises that robust safety management is a demanding responsibility and dependent upon the application of sound analytical, creative and engineering skills, based on extensive technical and domain knowledge. Understandably, there is not one safety management approach that fits all situations and customers have very specific requirements to consider. Our safety specialists are suitably qualified, experienced and dynamic engineers with an unwavering focus on attention to detail and customer needs.

Our core safety knowledge and capabilities include:

• Def Stan 00-56 and 05-123, POSMS, JSP375, 418, 430, 454, 553, 602 and 815
• Independent Safety Advice and Audit
• Hazard identification, analysis and management using CassandraTM
• Safety Case construction and Safety Case Reporting

Human Factors and Training Analysis, Design and Delivery

Our Human Factors (HF) experts specialise in the application of UK MoD and US DoD HF standards such as Def-Stan 00-250 and Mil-Std-1472G, as well as the wider HF applicable standards such as Def-Stan 23-09 for Generic Vehicle Architecture.

We have applied our Training experience to develop a range of innovative tools to enhance the analysis and design process including an analysis methodology which evaluates the fidelity requirements of task characteristics, rather than of the tasks themselves. This innovative approach supports accurate quantification of low and high fidelity training options, increasing the cost-effectiveness of the selected training solution.

We meet the challenges of Training in today’s environment by providing:

• Expertise in Training Needs Analysis and Human Factors Integration
• Highly experienced Training design specialists
• Fully qualified and experienced Training instructors

Military Operations Analysis and Modelling

For any Defence or Commercial project, it is vital that a clear understanding is developed at an early stage of how costs will arise across the full system life-cycle, covering all Defence Lines of Development (DLoD). Persides has both the expertise and experience to quantify the variability and sensitivity associated with Whole-Life Cost (WLC) and Availability drivers, to determine potential risks of taking candidate solutions forward to maturity and in-service support, and delivering these key customer requirements. Exploitation of the Witness™ toolset enables dynamic process simulation providing a highly flexible and scalable capability for business process, cost and sensitivity analyses, including:

• Service based modelling techniques
• Operational Availability vs. cost
• Training regime effectiveness and cost vs. fielding and operational sustainment requirements
• Cost of production vs. capability fielding profiles
• Optimisation of support infrastructure solutions against affordability targets

Customers

Persides provides services to customer and industry organisations in the defence, security and energy markets. Example customers include; UK MoD, DE&S, Dstl, BAE Systems, Boeing, Thales, Lockheed Martin, Raytheon, Kelvin Hughes, General Dynamics, Vectronix Inc, Force Protection Europe, Jankel  Armouring and Selex ELSAG.

Personnel

Persides capabilities are delivered by a complementary blend of high calibre ex-Military, academic, professionally qualified and experienced personnel who are equipped with leading edge tools and processes. Persides employees are selected and tailored for specific roles based on their technical expertise, experience and personal skills. If you are interested in a career with Persides visit our careers pages www.persides.com/careers

BBI Detection is part of the BBI Group, a leading provider of rapid, point of care systems for a range of applications. BBI Detection is a world leader in the development and manufacture of rapid tests to detect explosives and biothreat agents. Our unique access to high quality antibodies means that the performance of our products is assured, and our innovative sampling device -
IMASS - provides a simple and fast route to accurate results.

With secure facilities in the US and UK, and over 25 years’ experience in the development of assays, we are ideally placed to serve the needs of military and first responder markets worldwide. Additionally, our access to high quality biothreat antibodies and a full spectrum of sampling technologies gives us the ability to offer a direct route to effective assays.

IMASS™ – A unique detection platform for
military and 1st responders

BBI Detection has developed an “Integrated Multiplex Assay and Sampling System” – IMASS™, to sample and identify biothreats or explosives in white powder or liquid incidents. The IMASS™ platform provides the ability to rapidly sample powders liquids or surfaces using the integrated sampling sponge, once the sampling has been completed and the device is run, the sample is transferred simultaneously to all of the integrated assay strips. The IMASS™ was specifically designed with simplistic functionality and a robust ergonomic design to give end users the quickest and most reliable hand held assay and sampling system available.

The IMASS™ is available in a Biothreat Detection format and an Explosive Detection Format.

Advantages over current systems used include:

• Integrated Sampling and Assessment
• Ease of use (particularly when wearing full protective equipment
• Results in minutes
• Increase in sampling area
• Robustness
• Sample retention and recovery
• Device can be decontaminated after sampling
• Low training burden
• No power requirements

Biothreat Detection IMASS™

The Biothreat Detection IMASS™ device provides a crucial advance in rapid testing, particularly for ‘white powder’ incidents. The device is used to directly sample powders, surfaces or liquids using an integrated sponge, then eight immunoassay strips are run simultaneously from the sample giving results for eight biothreat agents in 15 minutes. Its robust design* means that the IMASS™ device is straightforward to run and to read, even while wearing full protective equipment.
*Licensed from the UK Secretary of State for Defence

KEY FEATURES

• Detects Anthrax
• Detects Ricin and other toxins
• Results in 15 minutes
• Easy to use in full protective equipment
• Can sample surfaces, powders or liquids
• No power requirements

CodeAgent Detected ANXBacillus anthracis (Anthrax)RICRicin ToxinBTXBotulinum Toxin A/BTULFrancisella tularensisPLAYersina pestis (Plague)BRUBrucella sppBTKBurkholderia mallei (Glanders)SEBStaphylococcal Enterotoxin B

Explosive Detection IMASS™

The Explosive Detection IMASS™ provides a crucial advance in rapid explosive detection for military, police, border and other first responders. The device is used to directly sample surfaces, solids and liquids using an integrated sponge. A number of test strips are then run simultaneously from the sample, giving visual results for military explosives and multiple homemade explosive components in 3 minutes. Its unique rugged design* means that the IMASS™ device is straightforward to run and to read, even while in full protective equipment.
*Licensed from the UK Secretary of State for Defence

KEY FEATURES

• Detects Military Explosives: TNT/RDX/PETN and their derivatives such as Semtex, C3, C4 and HMX
• Detects Homemade Explosive Components: Ammonium, Nitrate and Sugar
• Results in 3 minutes
• Easy to use in full protective equipment
• No power requirement
• Can sample surfaces, solids and liquids

CodeExplosive Component DetectedTTNTRRDX/RDX derivativesPPETN/PETN derivativesAAmmoniumNNitrateSSugar

© 2016 BBI Detection Ltd. All rights reserved.
BBI Detection™ and IMASS™ are trademarks of BBI Detection Ltd.
The IMASS™ device is manufactured and sold under licence from the UK Secretary of State
for Defence. Pat. No. GB2460956 and US12/999,064. Pat. Pend: EP09766120.1
The development of the explosive detection IMASS™ device was funded by the UK Ministry of Defence as part of a Dstl R&D project

Dry and Liquid Explosive Test Kits and Narcotic test Kits

BBI Detection also distributes a unique product portfolio of simple to use, rapid and low cost solutions for the presumptive identification of potential threat items in a variety of scenarios such as screening at secure checkpoints or the assessment of suspect powders or materials in clandestine labs.

• The Dry Explosive Test Kit (DETK) is a single use colorimetric-based test kit for the presumptive identification of military grade explosives and precursors used in manufacture of improvised explosives
• The ECAC certified Liquid Explosive Test Kit (LETK) is a colorimetric-based test kit for detecting liquid explosive residues found in liquids, aerosols, gels and creams and is designed for presumptive identification of concealable liquid threat materials.
• The Narcotics Test Kits (NTK) and Cannabis Test Kit (CTK) are a rapid, simple, and reliable technology designed for identification of Drugs of Abuse by first responders and frontline personnel.

SCHROTH Safety Products provides customized solutions for occupant protection in military ground vehicles, airplanes and helicopters of all varieties as well as motorsport and OEM automotive applications. With over 60 years’ experience in occupant protection, SCHROTH is one of the recognized leaders in seatbelt and seating products for military applications.

Modern safety systems require integration across complex platforms, which often call for customized solutions. Throughout the product lifecycle, from R&D through to prototype construction right up to series production, we control all processes according to state-of-the-art technology and carry out intensive testing and crash simulations for quality assurance purposes in coordination with the customer’s requirements.

SCHROTH Specializes in:

Seat Belt and Harness Systems

SCHROTH Military Harness Systems have been designed to meet or exceed the user requirements of the UK, US and European Militaries. SCHROTH Military Harness Systems are designed to be easy to use, with consistent configurations and features that provides maximum protection, rapid entry and egress, adjustability and comfort for a wide range of occupants while seated in forward, rearward or side facing seated positions.

SCHROTH has accumulated a wide range of hardware and restraint solutions for countless applications meeting world-wide standards and regulations. Regardless of your requirement, SCHROTH can most likely supply your solution.

• Water Activated Buckles (WAB)
• Multi Point Harness Systems for Field Stretchers
• Production and Program Management capabilities for Prototypes to Mass Production

Seating Systems for Military Ground Vehicles
(Mine Blast and Static Utility Systems)

SCHROTH’s lightweight utility troop seat systems offer an ITAR-Free, COTS (commercial off the shelf), low-profile, space-saving solution for a wide variety of vehicle installations. The mine blast and utility seating comes complete with an integrated ECE/FMVSS compliant lightweight 4-point harness restraint.

SCHROTH seating offers the ideal systems for commercial and military personnel and troop transport configurations.
Applications:

• Military, civil (police, border patrol, peacekeeping, disaster relief) and commercial

Gunner Restraints / Top Cover Harnesses / Standing Positions

SCRHOTH has multiple designs to meet various vehicle applications.

SCRHOTH’s Gunner Restraint Systems (GRS) have been fitted to over 160,000 vehicles for operations in Iraq, Afghanistan and other trouble spots world-wide.

Inflatable / Military Airbag Technology

SCHROTH has developed and delivered four-point restraints with integrated airbag systems for 125 German Boxer Armored Personnel Carrier (APC) vehicles.

The SCHROTH inflatable restraint system offers numerous innovative features including shoulder harnesses fitted with belt-integrated airbags.

In the event of a crash, sensors measure the resulting acceleration and trigger the gas generators that produce micro pyrotechnical charges allowing the airbags to be deployed within a fraction of a second.

Although airbags have been in commercial vehicles for years, there are very few applications of airbag technology for a production ground vehicle developed specifically for military applications.

This inflatable restraint brings state-of-the-art protection by integrating the airbag into the shoulder harness and providing protection for side-facing occupants.

Soft Ballistic Protection Solutions
(Military Vests and Armoring)

SCHROTH ballistic protection provides customized survivability solutions for police forces and military personnel. Designs based on our technical experts’ proven ballistic know-how and long-standing experience, SCHROTH body armor increases survivability while our range of carrier systems offers the highest possible level of comfort and wearability. Features of SCHROTH body armor solutions include the most advanced ballistic materials available, innovative technology, high ballistic performance, low surface weight, and innovative comfort features.

SCHROTH body armor is available in a wide variety of soft and hard ballistic configurations and can be customized to meet any ballistic standard or specific requirement.
SCHROTH body armor solutions are designed, developed and manufactured in Germany according to the highest quality standards.

STANDARD PROTECTION LEVELS

SCHROTH body armor solutions can be designed to meet the major international ballistic standards:

• Germany: SK1, SK2, SK3, SK4
• US: NIJ I, NIJ II-A, NIJ-II, NIJ-III-A, NIJ-III, NIJ IV
• UK: HG1/A, HG1, HG2, SG1, RF1
• Russia: GOST Class 1, 2, 2a, 3, 4,5, 6

Other international ballistic standards can be met upon request.
All major international standards for stab protection can be met.

Survitec Group is the world’s premier survival technology company. We protect your defence investment, every minute of every mission, providing unparalleled protection and life support, enhancing performance in the most extreme circumstances. With over 90 years experience and expertise supplying leading defence and aerospace companies and military end users, our mission is to deliver the best value safety and survival solutions from concept through to certification.

Through an extensive product range including Pilot Flight Equipment (PFE), Life Rafts, Life Preservers, Inflatable Boats, Air Beam Shelters and Submarine Escape Systems, the Survitec Group’s ethos of continually pioneering new technologies into the market place ensures we remain at the forefront of safety and survival technology.

Liferafts for Large Military Vessels

Survitec is the number one choice liferaft supplier for some of the biggest military organisations worldwide.  We manufacture a large range of liferafts for a number of different military applications, including maritime and aviation operations.  Our vast range of liferafts ensures we can always find a product to match any of our customers’ requirements.  From large military vessels to liferafts specifically designed for fixed/rotary wing and fast jet aircrafts, we offer an extensive range of off-the shelf products, or alternatively can partner with our customers to provide customised solutions where required.  Available in a number of different sizes, our collection of fully accredited liferafts has accumulated years of valuable in-service experience with a number of the world’s air forces and government agencies.

We also offer a single seat liferaft uniquely designed for single person occupancy for when minimal weight and stowage are critical for aircraft operation. The fully packed liferaft is so compact it can be stowed in confined areas such as a cockpit, or alternatively can be worn attached to the user during flight ensuring easy accessibility during aircraft evacuation. We are the sole supplier of the Single Seat Liferaft (RFD LRU23P) to the US Navy NACES program and we are currently actively developing solutions for the next generation of fighter and trainer aircraft, including JSF, EF2000 (Typhoon), JPATS and T-38.

Military Personnel Life Preservers

Life Preservers are possibly one of the most important pieces of equipment for military personnel when travelling on any vessel or aircraft.  Survitec have a long heritage in the manufacture of life preservers, with a specialist range suitable for a number of different mission types, from maritime naval operations, to modern war fighter pilots and front and rear crew in attack helicopters. 

Each life preserver has been designed specifically to optimise user performance and readiness. This includes specialist life preservers with complete armoured torso protection, designed for fast jets to fully optimise pilot/cockpit integration during ejection, with unique environmental fabrics for protection from cold water immersion and extreme heat and with a fully inflatable compact, lightweight design compete with parachute.
Our range of life preservers are currently in service in a large number of the world's naval fleets and airforces on various platforms such as the Chinook, Apache, Puma, Hawk, Harrier and Tornado.

Anti-G Suits - Pilot Flight Equipment (PFE)

Survitec is the world leading supplier of Pilot Flight Equipment (PFE), designing and supplying the latest generation PFE for the JSF F-35 and Eurofighter Typhoon. Our market leading range of PFE is a fully integrated yet modular clothing system designed to improve pilot performance and operational effectiveness.

Our PFE offers low burden, ‘off-the-shelf’ solutions with integrity and quality assurance proven by in-service performance.

Made to accommodate a number of mission scenarios, our PFE includes fully integrated CBRN solutions for pilots who may be exposed to a NBC threat.

Immersion Suits and Thermal Protection

We offer an unrivalled Immersion suit and environmental protection portfolio that provides exceptional protection against exposure for all military personnel during land operations conducted in extreme weather and aircrew evacuation and immersion situations over land and sea. 

Available for a number of different mission types including fixed and rotary wing, and fast jet applications, our environmental protection and immersion suits offer full body protection from hazardous conditions, such as fire or extreme cold. 

Designed to be compatible with a range of existing combat clothing, our range of suits have been adopted by a number of international Air forces, Navies, Coastguards and Marine and Aviation organisations.

Rapid Deployment Air Beam Shelters

Survitec Group has been manufacturing air beam shelters since 1985 and remains the supplier of choice for international military and disaster relief organisations.  Available in a large number of sizes and configurations our shelters have been tried and tested in the most extreme environments including the Iran and Algeria earthquakes in 2003, the Far East Tsunami relief operations in 2004, the Pakistan earthquake in 2005, and more recently the Haiti earthquake in 2010. 

We offer shelters for a large range of purposes including command & control, billeting, catering and accommodation, decontamination and medical treatment.  We also offer a range of inflatable CBRN tents for collective protection of people against NBC threats.  These tents combine rapid deployment with optimized fabric designed for maximum protection.

Inflatable, Semi Rigid and Customised Boats

Survitec pioneered the design and manufacture of Rescue Boats in 1931, making them the safest, most popular and widely used Rescue Boats in the international survival market. Designed for commercial and military applications and with broad adaptability we offer our customers inflatable, semi rigid and customised boat solutions.

Our products meet the highest safety regulations in the industry and all of our rescue boats meet current SOLAS approvals.

Hyperbaric Medical Chambers

The SOS Hyperlite is a non-metallic fully portable hyperbaric stretcher and treatment system that is fully approved and currently in use by the US military for fixed wing aircraft.  Used to administer critical medical treatment from remote locations, the Hyperlite is suitable across a variety of platforms including battlefield medicine, submarine escape and rescue, military diving and high altitude operations. 

The only system of its kind in the world, the SOS Hyperbaric portable stretcher and treatment facility can be used to combat decompression and altitude sickness, arterial gas embolism, carbon monoxide poisoning, blast trauma, blood loss anemia and biological/chemical/HAZMAT exposure.

TeleCommunication Systems’ (TCS) Space & Component Technology division, headquartered in Torrance, California, specializes in ultra-rugged solid state drives (SSDs) for the most demanding environments. TCS S&CT currently ships ruggedized SSDs in both high-customized and industry-standard configurations for military, aerospace, and industrial applications. All TCS SSDs work across industrial temperature ranges and meet Mil-Std-810 requirements for shock, vibration, temperature range, temperature shock, humidity and altitude. High-reliability packaging options support additional Mil-Std-810 requirements.

Rugged Military Solid State Drives with NAND Flash for Military, Army and Aerospace Applications

TCS designs and manufactures rugged solid-state drives (SSDs), radiation-tolerant electronic devices, and provides assembly capability. It offers strong expertise in multi-chip modules and 3D stacking, ASIC packaging, test and screening, system-in-package and custom build / packaging solutions. TCS delivers a variety of SIP, MMIC, custom, and radiation tolerant products to several US Primes and European defense contractors.

SSD Industrial Temperature Range for Military Applications

With 35 years in the Military and Defense markets, TCS is fully aware of the need to design in quality and reliability into our drives. Unlike many of our competitors, we do not use controller reference designs. Our drives are designed with Industrial or Military temperature range parts, taking into consideration thermal, mechanical and electrical requirements.

• Designed and manufactured in the USA at AS9100 certified facilities
• Built to IPC-610 class-3 level
• Employ only SLC NAND technology
• Forms 2.5 @ 9.5mm, @ 16mm, BGA and custom
• Capacity: 2.5 form 32GB to 256GB, BGA 8GB, 16GB and 32GB
• Near-term roadmap includes drives up to 400GB in capacity
• SATA 2.6 at 1.5 and 3.0GB/s
• Operating temperature: -40°C to +85°C
• Tested to boot cold from -60°C
• Standard military input voltage tolerance of ± 10%
• Low power requirements; integrated power-fail management
• Storage temperature: -50°C to +95°C

Solid State Drives for High Vibration Applications

Solid State Drives for High Vibration Applications Drives designed for high vibration applications incorporating Military PCB’s, 8 mounts within an anodised milled aluminium package.

• Army Vehicles
• Rugged Army Gun Mounts
• Rugged Military Vibration Sensitive SSD
• Rigorously tested and independently verified to MIL-STD-810
• Shock: 1,500G at 0.5ms
• Vibration: 16.3G minimum RMS, 20Hz to 2KHz, one hour per axis, three axes
• High altitude 80,000ft
• Random vibration options up to 45Grms available
• Mechanical shock tested at 50g @ 11ms, ½ sine, six-direction, 3X
• Burned in for eight hours with option for 96-hour extended burn-in
• Other assembly options include conformal coating, silicone gel and epoxy staking Solid State Drive Obsolescence

Solid State Drive Obsolescence

We assure continued availability to our military customers through our Obsolescence Management, this includes not only FFF replacements, we also introduce the possibility of providing our customers with advance notice of critical component EOL this allows for advance procurement of the current SSD by the customer or alternatively the ability to work with TCS in partnership to advance purchase critical components and controllers, in some cases also NAND Flash. Of course we also work with customers to preserve FFF SSD in terms of a cloned SSD utilizing the latest controller and NAND flash technologies and providing a FFF replacement.

Solid State Drive SSD Galatea 100GB 200GB Encryption

Galatea® Solid State Drives (SSDs) defines the leading edge for performance and reliability in ultra-rugged mass storage. These drives fit up to 200GB SLC NAND Flash of user memory into standard 2.5 inch, thin (9.5mm height) dimensions and delivers sustained read / write rates of 280MB/s along with random read / write rates over 30,000 IOPS. Combining 128-bit AES encryption with high-speed full-drive erasure (200GB in less than 1s) raises data security to new levels.

Solid State Drive SSD ECC

Advanced error correction pushes the bit error rate a full two orders of magnitude beyond the industry standard, while exclusive write optimization and wear-levelling techniques reduce erase / program cycles and achieve a 20-fold increase in media life expectancy. The Galatea Standard SATA supports the SATA II, revision 2.6, interface standard at 1.5Gb/s and 3.0Gb/s.

• Plug'n'Play, independent of operating system
• No device driver development required
• Write protect and jumper
• ATA/ATAPI-7, SMART and TRIM supported
• Data retention: more than ten years
• Endurance: more than 100,000 writes
• MTBF: more than 1.24 million hours, Telcordia 25°C, 32GB SSD
• Resulting bit error rate less than one in 10e14 and better

Rugged 256GB SSD

The PROTEUS-Plus is available up to 256GB in SLC NAND Flash, delivering sustained read/write speeds of 250MB/s and 205MB/s. It is equipped with integrated hardware support for on-the-fly, per sector error detection and correction, and is protected by a precision-machined, anodised aluminum alloy case for ruggedness. Other features include:

• Fast erase <3s (256GB)
• Alternative erasure methods upon request
• Low-power, max read/write 1.30W/2.00W(128GB)
• 64MB cache enables high IOPS for small block random operations
• Supports SATA, revision 2.6, interface standard at up to 3.0GB/s
• ITAR free

Vibration and Shock-resistant BGA Package

The BGADrive® is a complete BGA package solution that can be soldered directly to the motherboard. It is vibration and shock-resistant and has a sustained R/W speed of up to 45MB/s, with access time of 0.5ms. The drive is operating system independent, resistant to extreme shock and vibration, and compact at 31mm x 31mm. It is equipped with a write protect pin and IDE Ultra-DMA 100.

Proteus Plus Embedded Modules

The speed and ruggedness of the TCS’ Proteus Plus Solid State Drives is now available in bare board 2.5 PCA and MO-Series form factors for embedded use. Available in capacities from 32GB to 256 GB, these drives provide another option for delivering extreme ruggedness and reliability to applications where an industry standard drive form factor is too large.

Guartel Technologies Ltd is an established company which has built its' reputation on the design, development and manufacture of high quality, professional metal, mine and command wire detection equipment, for use in Counter IED, EOD, WIT & Search operations. Guartel conducts a continuous programme of R&D to meet current and emerging threats. The company is ISO 9001:2008 registered and is security cleared by UK MoD.

Key Counter IED and Search Products

Buried/Underground Cable Detectors - WD100

The WD100, buried/underground Cable Detector is the only commercially available detector specifically designed to detect surface laid and buried command wires used to initiate Command Wire Improvised Explosive Devices (CWIED).

Military Metal Detecting Probes - MD4

The military metal detecting probe MD4 is used by many NATO countries, it is rugged and simple to use The detection capabilities allow the operator to locate small targets and to gauge the depth and size of objects such as victim operated switches. MD4 is self calibrating with operator zeroing function.

Military Mine and Metal Detectors - MD8+

Ergonomic, simple to use high sensitivity military metal/mine detector, the MD8+ employs the latest digital technology and high speed pulse induction which allow the detection of the smallest metallic targets.

Rugged Hand Held Metal Detectors - HD7

The rugged hand held metal detector HD7, is simple to use and is weather resistant and can be utilized indoors or out doors. HD7 can be used for person search. personal area search and target confirmation. Alarm modes: silent vibrate, audio, visual/audio.

New Products – MD3000 Multi Role Metal Detection Kit, designed for use by police search teams and other investigative agencies, the MD3000 is a state of the art easy to use detector. The MD3000 has two inter-changeable search heads, a halo for general area search and a probe for use in undergrowth and narrow cavities.

Command Wire Detector - WD10

WD10 is a high performance passive command wire detector for use by CIED Search teams and IEDD operators. The detector is easy to use, having simple controls for power and pin-pointing a target.