Kejo Limited was founded in 1997 in Florida and quickly established itself as a key supplier of body armor to level IV (NIJ), bomb and ballistic blankets, EOD bomb disposal suits, de-mining equipment, shields and helmets under its registered trade mark Kejo ® to the US Army, US Navy, Marines and the US Air Force. It's staff have over 30 years of experience in the business and upon request, Kejo can custom make bomb and ballistic resistant products including vehicle protection and even helicopter floor ballistic protection to your specifications.

Kejo™ Saviour™ EOD Bomb Disposal Suits

The KEJO™ Saviour ™ EOD Bomb Suit is designed to offer the maximum protection with the minimum weight making it one of the world’s most advanced high-performance cost-effective suits available. The suit aims to be the most comfortable and flexible suit available offering the highest levels of protection against blast threats. The latest material technology is used to keep the suit as flexible and as comfortable as possible whilst maintaining the highest levels of integrated protection . The suit can also be quickly donned without special assistance and incorporates a quick release system for the rapid removal of the suit.

Click here for more information about the Kejo™ Saviour ™ EOD Bomb Disposal Suit.

Kejo™ EOD Tool Kits - Non-Magnetic MRI Maintenance Tool Kit, Universal Field Service Tool Kit, 1000 Volt Insulated Tool Kit

Kejo's Custom Made EOD Tool Kits are designed with the ultimate protection and safety in mind and are excellent value for money. The Non-Magnetic MRI tool kit is built for Biomedical Service Technicians working on or near highly magnetic MRI equipment. The Non-Sparking, Non-Magnetic (3-Tesla Safe), Corrosive Resistant tool kit comes neatly packaged in a hard sided plastic tool case with a custom foam tool controlled interior. It is safe for use on GE, Siemens and Philips MRI equipment. The Universal Field Service Tool Kit is a general purpose tool kit which is ideal as a Field Service Starter Kit and is designed with Field Service Engineers, Electronics Service Professionals, Computer Repair Technicians, Biomedical Repair Specialists and On-site Service Technicians in mind. Kejo has assembled the Metric 1,000 Volt rated Insulated Tool Kit to protect people, property and productivity. Double insulation provides a visual cue for tool failure. If the yellow shows through don’t use the tool near voltage!

Click here for more information about the EOD Tool Kits and Tools.

Kejo™ EOD Helmets, EDU Explosive Disruption Shields, Tactical EOD Suit, IEDD Search Suits

The Kejo EOD bomb helmet incorporates the latest materials technology and moulding techniques to provide a helmet that is not only ballistic superior but also shaped to fit the wearer’s head. It is also designed to fully integrate within the collar of the suit without impeding the lateral and rotational movement of the head. The EDU shield has been developed for use by explosive disposal and tactical teams to offer maximum over pressure and fragmentation protection during explosive disposal operations. The EDU is equipped with removable spring-loaded legs. In the stowed position, the legs hug the edge of the shield for easy storage and manoeuvrability. One easy motion releases the support legs into the deployed position, allowing the shield to be self-supporting. The Kejo Search Suit was designed for personnel involved in searching for and clearing of explosive devices, and has been developed to meet the specific needs of a search team. Although the suit is significantly lighter than the standard EOD Bomb Disposal Suit, it provides the user with all round protection, unmatched mobility and virtually unrestricted movement. The outer garment of the suit is constructed out of Nomex III and includes the latest Kevlar New Technology Fibers. Kejo can also supply a wide variety of EOD tools and accessories for any bomb disposal applications.

Click here for more information about EOD Equipment. 

Kejo™ Body Armor  – Military Assault Vests, Bullet Proof Vests

All of Kejo's Military and Police Body Armor is designed to meet the stringent specifications and application needed by Law Enforcement; The Kejo™ Military Assault Vest, Level IIIA, with front, back and side ballistic protection is designed as a high-mobility front opening vest to be worn over a soldier’s uniform. It protects to the National Institute of Justice (NIJ) IIIA level. The Kejo™ US PASGT is a jacket style vest ideally suited for use by military or riot police. The vest provides complete protection for the front, back and sides as well as the neck. The Kejo ™ Special Forces level IIIA (NIJ) is designed and manufactured to meet the needs of elite forces of the military and police. This light tactical vest with attached collar provides full front, back and side coverage and for additional shoulder coverage the padding can be removed and ballistics can be added.

Click here for more information regarding Military Body Armor.

Kejo™ Military and Law Enforcement Tactical Vests - SO-TAC Vest Special Ops Level IIIA, Light Tactical Vests, Executive Body Armor

All of Kejo's Tactical Body Armor Vests provide full tactical coverage without restricting movement. The SO-TAC is the perfect complement to your Special Ops mission. Designed with today's modern warrior in mind, this vest can be geared up to perform. Providing full front, back and side coverage this vest is designed to balance the weight of the ballistics and provide comfort for the end user. The Kejo Grizzly Comfort Cut Level IIIA - Light Tactical Vest provides the mobility and comfort of a concealable in a tactical vest. This light tactical vest provides full front, back and side coverage and is great for tactical missions where a throw-over could be used or full gear (i.e. groin, biceps, and collar) is not required. Available in level II or IIIA ballistic packages. The Kejo™  Execuvest has been designed as a discrete overt armour vest, providing full front, back and side ballistic protection. Ideal for VIPs ,Businessmen and Bodyguards. The vest that looks like a harmless waistcoat but dont be fooled by its ballistic capabilities.The ideal protection for professionals and businessmen.

Click here for more information about Tactical Vests.

Kejo™ Custom Bomb and Ballistic Blankets – Various Sizes Level IIIA, Level IIA and Level II (NIJ) Bomb and Ballistic Blankets

All of the Kejo Bomb and Ballistic Blankets meet the various levels of protection stated and offer fragmentation protection for use in IED/EOD operations. All are made to Stanag standards and are manufactured with Kevlar Aramid to provide the ultimate protection.

The Humvee Bomb Blankets protect vehicles from blasts and ballistic threats. These blankets are made to order with price upon application.

Click here for more information about the Kejo Bomb and Ballistic Blankets.

Spray Applied Force Protection

PAXCON [PX-3350], developed by LINE-X is an advanced spray applied polymer coating formulated to mitigate the effects of a bomb blast.

The Effects of Blast Mitigation

PAXCON is sprayed on the exterior and interior of the supporting walls and is touch dry in seconds. During a bomb blast PAXCON mitigates the effects of the explosion by providing a flexible liner that absorbs the force of the blast and holds the fragmented wall together.

PAXCON has been put through extreme testing by the Air Force Research Laboratory. Testing involved 9’x9’ panels, one uncoated and the other coated with PAXCON which were exposed to bomb blasts at a distance of 35ft. The PAXCON coated panel survived this test whilst the non coated panel disintegrated as a result of the blast.

Futher tests constructed by the Air Force research lab provided evidence that walls coated in the PAXCON material can reduce the stand off distance by over 50%.

The tests also indicated that PAXCON was the only coating that passed all bomb blast testing out of the 27 coatings that were tested.

After the 9/11 attacks in America LINE-X developed PAXCON to help protect current and future assets from attack.

The US Pentagon was one of the first major Government buildings to specify PAXCON “to protect the Pentagon against potential impacts and bomb blasts.”

Blast Resistant Coatings Protecting Military, Civilian and
Government Buildings

PAXCON coatings are currently protecting military, civilian and government building across the globe. Applications can include underground car parks, banks, large postal offices, airport baggage handling centres and new architectural projects.

PAXCON can also be specified  for new builds and applied during the construction of the site. Once the structural walls have been built, PAXCON applicators go on site to spray the polymer coating onto the prepared wall. With rapid touch drying time of only a few seconds PAXCON does not hold up the construction process of the site. Once the coating has been sprayed, the carpenters, builders and plasterers can carry on with their duties almost immediately.

LINE-X Protective Coatings Ltd also have a structural and masonry retro fit program where existing buildings/structures can have PAXCON applied to the substrate of the supporting walls, making them resistant to particular forms of bomb blast.

The retro fit program includes PAXCON being applied to lightweight structures such as plywood panelling and timber stud walls as well as heavyweight masonry structures made from brick or blockwork.

PAXCON polymer coatings will adhere to most well prepared substrates including wood, steel, fiberglass and dyneema.

PAXCON Provides Anti-Terror Protection

PAXCON Blast Mitigation is an integral part of security planning. When security fails to prevent acts of terrorism PAXCON is there to save and protect targeted assets from terrorist attempts. PAXCON should be integrated into your anti-terrorism package to protect your assets when other preventative measures have not succeeded.

Enhanced Polymer Coatings for Ballistic Protection

Blast Mitigation is one of many coating solutions provided by LINE-X Protective Coatings Ltd. LINE-X Spall Liner [PX-2100] is a spray applied coating that absorbs the impact from projectiles preventing both the projectile and the armoured plating from creating spall.

Spall is the name given to fractured elements from a projectile or armoured plating that occur when that projectile impacts at high speed with the armoured plating. These fractured elements when dispersing are the cause of a large volume of injuries to many of our soldiers.

The flexibility and absorption that LINE-X Spall Liner offers when applied to armoured panels eradicates the splintering effect by cushioning the impact and entrapping the fractured elements.

Impact Absorbtion Qualities

The LINE-X spall liner has been engineered from specially formulated polymers to allow a certain degree of flexibility and durability to be able to absorb the impact from high speed projectiles when coated onto armored panels.

These advanced polymers have allowed the LINE-X to produce a spray-on Spall Liner for armoured vehicles to be used in conjunction with Dyneema and similar armoured panels which is significantly lighter and more cost effective than armouring with steel plates.
Other Spall Liner applications include the coating of Breastplates and Gun Turrets. LINE-X Spall Liner is currently being used on both the strike side and reverse side of Dyneema, Ceramic and Armour Plated panels.

Advanced Armoured Vehicle Coatings

LINE-X applications are being specified and carried out on several military and ‘blue light’ fleets due to the many advantages LINE-X coatings have to offer.

The ballistic properties are obviously one of the key attractions of the LINE-X Spall Liner material, which is able to provide advanced, lightweight  armoured protection at a lower cost to the usual methods of up-armouring vehicles. This coating also offers plenty of hidden gems including rust and corrosion prevention, resistant to most chemicals; it is easily maintained, and offers a non-skid surface.

Military vehicles operate in harsh and rough terrains, which have a tendency for rocks, stones and debris to be thrown up causing damage to the vehicle. The superior durability of the LINE-X range of coatings have lead to many military fleets adopting LINE-X as their choice of protective coating, in order to prevent exactly this type of damage from occurring.

UK “Blue Light” fleets have started to adopt the LINE-X coating as a Van Liner for the added protection of preventing projectiles such as scaffold poles being forced through the standard metal side panels of the van as well as providing a non-skid surface that is easily jet washed back for cleanliness.

SCHROTH Safety Products provides customized solutions for occupant protection in military ground vehicles, airplanes and helicopters of all varieties as well as motorsport and OEM automotive applications. With over 60 years’ experience in occupant protection, SCHROTH is one of the recognized leaders in seatbelt and seating products for military applications.

Modern safety systems require integration across complex platforms, which often call for customized solutions. Throughout the product lifecycle, from R&D through to prototype construction right up to series production, we control all processes according to state-of-the-art technology and carry out intensive testing and crash simulations for quality assurance purposes in coordination with the customer’s requirements.

SCHROTH Specializes in:

Seat Belt and Harness Systems

SCHROTH Military Harness Systems have been designed to meet or exceed the user requirements of the UK, US and European Militaries. SCHROTH Military Harness Systems are designed to be easy to use, with consistent configurations and features that provides maximum protection, rapid entry and egress, adjustability and comfort for a wide range of occupants while seated in forward, rearward or side facing seated positions.

SCHROTH has accumulated a wide range of hardware and restraint solutions for countless applications meeting world-wide standards and regulations. Regardless of your requirement, SCHROTH can most likely supply your solution.

• Water Activated Buckles (WAB)
• Multi Point Harness Systems for Field Stretchers
• Production and Program Management capabilities for Prototypes to Mass Production

Seating Systems for Military Ground Vehicles
(Mine Blast and Static Utility Systems)

SCHROTH’s lightweight utility troop seat systems offer an ITAR-Free, COTS (commercial off the shelf), low-profile, space-saving solution for a wide variety of vehicle installations. The mine blast and utility seating comes complete with an integrated ECE/FMVSS compliant lightweight 4-point harness restraint.

SCHROTH seating offers the ideal systems for commercial and military personnel and troop transport configurations.
Applications:

• Military, civil (police, border patrol, peacekeeping, disaster relief) and commercial

Gunner Restraints / Top Cover Harnesses / Standing Positions

SCRHOTH has multiple designs to meet various vehicle applications.

SCRHOTH’s Gunner Restraint Systems (GRS) have been fitted to over 160,000 vehicles for operations in Iraq, Afghanistan and other trouble spots world-wide.

Inflatable / Military Airbag Technology

SCHROTH has developed and delivered four-point restraints with integrated airbag systems for 125 German Boxer Armored Personnel Carrier (APC) vehicles.

The SCHROTH inflatable restraint system offers numerous innovative features including shoulder harnesses fitted with belt-integrated airbags.

In the event of a crash, sensors measure the resulting acceleration and trigger the gas generators that produce micro pyrotechnical charges allowing the airbags to be deployed within a fraction of a second.

Although airbags have been in commercial vehicles for years, there are very few applications of airbag technology for a production ground vehicle developed specifically for military applications.

This inflatable restraint brings state-of-the-art protection by integrating the airbag into the shoulder harness and providing protection for side-facing occupants.

Soft Ballistic Protection Solutions
(Military Vests and Armoring)

SCHROTH ballistic protection provides customized survivability solutions for police forces and military personnel. Designs based on our technical experts’ proven ballistic know-how and long-standing experience, SCHROTH body armor increases survivability while our range of carrier systems offers the highest possible level of comfort and wearability. Features of SCHROTH body armor solutions include the most advanced ballistic materials available, innovative technology, high ballistic performance, low surface weight, and innovative comfort features.

SCHROTH body armor is available in a wide variety of soft and hard ballistic configurations and can be customized to meet any ballistic standard or specific requirement.
SCHROTH body armor solutions are designed, developed and manufactured in Germany according to the highest quality standards.

STANDARD PROTECTION LEVELS

SCHROTH body armor solutions can be designed to meet the major international ballistic standards:

• Germany: SK1, SK2, SK3, SK4
• US: NIJ I, NIJ II-A, NIJ-II, NIJ-III-A, NIJ-III, NIJ IV
• UK: HG1/A, HG1, HG2, SG1, RF1
• Russia: GOST Class 1, 2, 2a, 3, 4,5, 6

Other international ballistic standards can be met upon request.
All major international standards for stab protection can be met.