We at DPSG USA, Inc. create superlative vehicle towing, recovery, and terrain management solutions. Our Wunderbar™ Articulating Tow Bars (ATBs) and safety recovery straps make life simpler, easier, and safer when it comes to vehicle towing, and that means saving money, as well as the most important asset of all- the lives of our warfighters.

What makes the Wunderbar™ Articulating Tow Bar so Exceptional?

1. It weighs only 25 pounds (11 kg.), yet the WunderbarTM 20K Articulating Tow Bar can tow a 20,000 pound (9,072 kg.) vehicle. HMMWVs weigh slightly less and in less than 5 minutes can be set up to tow. That is exceptional. Conventional tow bars take between 20-to-45 minutes to set up for towing, according to JPO statistics.

3. In testing, the Wunderbar™ was driven over every kind of terrain to prove its battle-worthiness. They have been tested and fielded all over the world, including Iraq, Afghanistan, Africa, Australia, Denmark, United Kingdom, Spain and North America.

4.  All Wunderbar™ ATBs have a minimum of 2:1 safety factor at the Working Load Limit (WLL) rating specified.

5. Wunderbar™ ATBs weigh less than any other tow bars with similar towing capacities. DPSG USA, Inc.’s Wunderbar™ ATB for HMMWVs is approximately 10 times lighter than the ‘other’ Army-approved tow bar for HMMWVs.

6. Wunderbar™ ATBs allow you to hook up to vehicles without ever having to enter the ‘crush zone’. This is typically the most difficult and dangerous part of any tow bar setup for towing.

7. Wunderbar™ ATBs hook up - in park - in under a minute on any terrain because the hook-up zone is 4 feet (1.2 m) in diameter.

8. Wunderbar™ ATBs are available in different sizes to accommodate any vehicle, from the 20 lb. (9 kg.) Ultra Light 7K ATB to the 325 lb. (147 kg.) 180K Tank ATB.

9. Wunderbar™ ATBs are one-person deployable. That means that the driver of the tow / recovery vehicle can get out of the vehicle and attach the ATB in the crush zone safely while both vehicles are in park.

10.  Wunderbar™ Articulating Tow Bars (ATBs) and Safety Recovery Straps are made by Defense Products and Services Group USA, Inc.

We at Defense Products and Services Group USA, Inc. (DPSG USA, Inc.) know the risks you take, whether in training, on the battlefield, or on the road. Any vehicle can get stuck or disabled. Preparing for that eventuality is a must, so we’ve raised the bar on the tow bar.

The Wunderbar™ is a stalwart and uncompromising insurance policy. Wunderbar™ ATBs hook up easily on or off-road and perform impressively on any terrain. And what’s more, you hook up both vehicles in park. No other manufacturer can make that claim.

Would you jump from an airplane without the best parachute?

Or climb a mountain without the best rope?

So why would you go out in a vehicle without the Wunderbar™ Articulating Tow Bar?

Wunderbar™ tow bars get you going safely in seconds- not minutes or hours- saving time, equipment, and lives.

Our mission is to advance ground vehicle readiness and provide dominant, superlative mobility to the U.S. military and our allies.

Based in Hartwood, Virginia, DPSG USA, Inc. creates superlative vehicle towing, recovery, and terrain management solutions. At DPSG USA, Inc., recovery is now safe and quick. Just look at our Wunderbar™ articulating tow bars (ATBs).

Wunderbar™ ATBs are the most innovative design in towing in the past 100 years. The Wunderbar™ is a leap in tow bar technology, bringing like-vehicle recovery to a new plateau of safety and speed that will be an insurance policy for any vehicle, especially tactical vehicles. Our line of synthetic safety recovery straps and synthetic safety chains complements our tow bars.

DPSG USA, Inc. Wunderbar™ ATBs and safety recovery straps make life simpler, easier, and safer when it comes to vehicle towing, and that means saving money, as well as the most important asset of all- the lives of our warfighters.

Wunderbar™ ATBs are approved by the U.S. Army, U.S. Marines Corps, U.S. National Guard, U.S. Special Forces and our allies.

Remember, it’s not just a tow bar. It’s a Wunderbar™.

Tyron has developed a range of solutions to keep wheeled vehicles moving safely in the event of a sudden tyre deflation.

Created following extensive consultation with both end users and tyre manufacturers, Tyron's solutions have been extensively tested and proven in the harshest conditions.

The company's two product families are the Tyron All Terrain Rubber Runflat or ATR and the Tyron Multiband. In both cases these have been designed to allow for the changing of tyres without the need for specialist equipment.

Multipart All-Terrain
Rubber Runflat (ATR)

Tyron has developed and patented a multipart rubber runflat, suitable for fitting to a wide range of military and security force off road vehicles.

Made out of rubber, the Tyron ATR absorbs the shocks from bumps more effectively than a hard composite solution and reduces the damage to both the wheel and the tyre, so that both have the potential of being re-used when repairs have been carried out.

Using rubber also gives the passengers inside the vehicle a more comfortable ride in the case of a tyre burst, which enables them to be in better shape to carry out their task.

The patented multi part design allows the fitter to change a tyre at the side of the road without special tools.

Tyron's rubber runflats are designed with beadlock, which prevents the wheel slipping inside the tyre, this allows the vehicle to continue on its mission and get back to base. This is not possible using other materials.

Complete Wheel Assembly for All Terrain Environments

Working together with Global Wheels of South Africa, Tyron is able to provide a complete wheel and tyre solution fit for the most demanding environments.

These combine the strength of the bolt together with steel or aluminium wheels, along with the multipiece Tyron ATR to provide a very high level of road performance, which is not possible with a composite solution.

Distance and Speed Testing and Ballistic Protection

Tyron's ATR solution has been extensively tested in accordance with the internationally recognised Finabell standards for distance and speed. During all the tests the Tyron ATR far exceed the requirements.

The ATR has been ballistically tested. Five shots were fired into the side of the runflat and two into the tread area from 50m with an AK47 using 7.62mm bullets and an M16 using 5.56mm rounds.

Special effort was made to hit the fixings with one round making a direct hit on the fixing head, which ricocheted off and another hitting the washer and was absorbed.

The other three simply passed through the rubber system. The two shots into the tread area around the fixings were absorbed and none of the shooting had any effect on the performance of the runflat system.

The same test was also carried out at only 25m with the same results. In total, 35 rounds were fired at the runflat with no structural integrity damage.

Multiband for Defence and Security

Developed by Avon Tyres in the 1970s for the Royal Ulster Constabulary, the Tyron Multiband is designed to keep the tyre firmly in place on the wheel, allowing the vehicle to be driven to a safe place to change the tyre.

The Tyron Multiband is in use on a wide range of vehicles including police and fire vehicles, ambulances, and cash-in-transit vehicles.

In all cases where Tyron Multibands are fitted, it is to ensure that the tyre stays in place in the event of a 'blow out' and ensures the driver can manoeuvre the vehicle to safety.

Will-Burt Germany provides high-quality mobile mast systems and trailer solutions for military and security / rescue forces. They are used around the world: the armed forces of Germany, its NATO allies and other likeminded nations. Will-Burt Germany has progressively turned into a global player with subsidiaries and partners on every continent.

The object of Will-Burt Germany is the development, project planning, construction and system integration of our customized trailer systems. We carry out and follow your plan from A to Z. Special trailers for special tasks are our specialty. Many of our trailers are manufactured in small series. They are used by the German Army and other international forces. Our trailer systems are especially designed for missions involving extraordinary burdens in extreme and arduous terrain. High payloads in combination with low basic weights, maximum cross-country mobility, long life expectancy and low maintenance requirements are the characteristics of all Will-Burt Germany tactical trailers.

Our mast systems are used by international forces around the globe, including the German Army, to provide communications, surveillance, reconnaissance support etc. throughout the battlefield.

The Expedition series (Ranger mast) is the lightest, most durable, rapid deploying, single man-portable field masts in the world. This system is equipped with lightweight payloads and can be deployed quickly by extending 1.2m sections to heights from 2.5m to a maximum of 18.3m. It’s our system for the ‘last mile’.

The AntennaMast AM2 model is a portable, lightweight, rugged, aluminum tripod mast designed for rapid payload deployment. The AM2 can raise multiple devices on an individual mast and is highly flexible and reliable. Users can lift and lower larger payloads in a secure way without disassembling the mast system by using the EZ Raze™ system and its safety brake and cable winching device. The mast tube lift winch supplies mechanical assistance for mast tube lifting for heavier payloads, and the mast tubes and payload can also be elevated by breach loading the tubes through the tripod center collar.

Telescopic crank masts KVL and KVR (also called cable pulls) are for payloads up to 70kg and heights up to 20m. They are suited for heavy communication systems, monitoring solutions, direction finder, target detection systems, etc. and used by the market leaders. These masts uphold their reputation through their robustness and simple operation. The extension and retraction of this mast type is realized through a retractable rope and a separate return rope. This guarantees a reliable operation independent of the weather conditions.

The Spindle mast SPM is currently the best available mast system on the market. Grown against the hardest requirements, the SPM is specifically designed for use with large payloads and very high demands of accuracy. The retracting and extension occur through special spindle systems. A special honing procedure of the aluminum tubes and the use of high-precision spindles enables the manufacturing of nearly backlash-free telescopic spindle masts for heights up to 18m and payloads up to 600kg!

The spectrum of lattice towers starts with the ITS Towers. ITS offers an innovative line of commercial-off-the-shelf (COTS) tower solutions from 11.5m to 32m. Will-Burt Germany lattice towers are customized solutions, mounted on trucks or trailers, for heights up to 45m and payloads up to 1000kg. Our giants!

The Will-Burt Company is pleased to introduce the One Company initiative, a program designed to ensure that we operate as One Team, guided by One Vision, representing One Brand – Will-Burt. This initiative formalizes our way of thinking and our passion to serve our customers. It was created to make it easier for our clients to engage with Will-Burt, no matter where they are or whomever they communicate with in our global organization. All locations have been renamed Will-Burt followed by their geographic location. For instance, GEROH, located in Germany, has been renamed Will-Burt Germany Gmbh & Co. KG. Company web sites will be consolidated under www.willburt.com and the GEROH social media platforms will be renamed Will-Burt Germany.

Established over 50 years ago, AEI Systems is a UK BSI quality approved Company supplying weapon systems and military aircraft spares to customers around the world.

Aircraft Weapons Systems

  Design Excellence

We specialise in the design, manufacture, test and support of a wide range of small to medium calibre military weapon systems for air, sea, land and dismounted soldier applications.

Reputation

Renowned for our aircraft cannon knowledge and expertise, AEI Systems is the Design Authority and ‘Original Equipment Manufacturer’ to BAE for the ADEN 30mm Gun system as installed in the Hawk advanced trainer aircraft.

Weapon Mount Systems

Through Life Support

Obsolescence management and continual product improvement has given rise to a new ‘high rate of fire’ revolver cannon. The ASPEN 30, with blast suppression, improved recoil systems and gas regulation catapults this ADEN 30 variant into the 21st century.

Numerous other aircraft weapon types are supported; M39, M134, MO32 and DEFA to name just a few.

Cost Effective Solutions

AEI’s manually operated 20mm HS804 naval weapon systems offer cost effective gun solutions, while delivering an impressive punch.

In addition to the reliable AE20-NM naval weapon mount, we now produce belt-fed variants for prolonged target engagements. These mounts are in service around the world and are suitable for vessels of all size from RIB’s to Frigates.

Innovative

For military vehicle applications; AEI has developed a lightweight all Aluminium cradle AE20-VM with spring assist yoke for the HS804 belt-feed weapon system. Mounting is adaptable to suit individual slewing ring or pedestal interfaces, with an in-house designed flexi-chute feed linked to the vehicle ammunition tank location.

New Markets
For the dismounted soldier; AEI is in the process of design and manufacture of a complete range of 7.62 millimetre bolt action and 12.7 millimetre semi-automatic tactical weapons. A 20 by 110 millimetre variant will be available within 12 months with a 30 x 113 millimetre variant will follow shortly after. These weapons bring new and innovative features to the market and are designed and built to military aircraft standards of quality and precision.

Barrel Production

Expand in Capabilities

AEI has expanded its manufacturing capability to include in-house barrel manufacture up to a maximum of 105mm, both constant and progressive pitch. This gives us the flexibility to rapidly develop weapon variants of our existing designs to fire the 20 by 102 and 25 by 137 millimetre rounds for naval and land vehicle applications in response to customer demands.

AEI Systems; Quality, Precision and Innovation

Truck-Lite Europe Ltd is a global leader in the design and manufacturing of vision systems; servicing the Commercial Vehicle, Military and Defence Vehicle, Off-Highway and Automotive sectors of the industry. Alongside our sister companies in the USA and Asia, we have been supplying some of the largest OEM’s worldwide with components for fifty years; from the likes of Daimler, Volvo and Scania to some of the largest military organisations in the world; including the US military.

Military Vehicle LED Lighting Technology

A LEADER IN THE DESIGN OF VISION SYSTEMS

Working with such giants of the industry enables us to understand the demanding requirements, our lighting and mirror products have to meet.

Under the brand names of Truck-Lite, Rubbolite, FER and Signal-Stat we have become a fore runner in lighting technology and mirror manufacturing. We have a strong emphasis in the design and innovation of LED technology – a phrase which is now synonymous with Truck-Lite and displaying our ability to adapt to an ever-changing and evolving marketplace.

SPANNING ACROSS THE GLOBE

With a strong heritage and 11 manufacturing locations spread over nearly 100,000m² worldwide, we are able to support our customers regardless of their location. Owned by Penske, the largest logistics company in the USA, our plants span the globe: from New York, and Pennsylvania as well as Mexico in North America, to China in Asia, and Germany, Poland and Belarus in Europe. Our UK bases are in Harlow, Essex and Birmingham.

Military LED Vehicle Lights

MILITARY LIGHTING: FROM THE FRONT, DOWN THE SIDE, TO THE BACK

Truck-Lite Europe Ltd has developed its products in accordance with the ever growing demands of both the customers we serve and the technologies we have helped develop. We are evolving the way in which ‘Vision Systems’ are being viewed, and working with our OEM customers.

We manufacture lighting from the front to the back of the vehicle: headlamps, auxiliary lamps, floodlights, side markers and rear lamps, which are able to be mounted on various applications – from tanks and armoured vehicles, to recovery vehicles, four-wheeled drives and SUVs.

SUPPORTING OUR CUSTOMER WITH OUR TEAM

Truck-Lite globally provides vision solutions to various military organisations within the UN, involved in ISAF engagement. Military lighting systems are mounted to vehicles in both conflict and post-conflict arenas.

We take a 360° approach to our customer relations, keeping the company structure flat; removing the red tape, improving communication and bringing decision makers close to the ground. Our Managing Director Aaron Ryalnce insists on this. He said: “It’s vital to maintain a steady and transparent information flow - from those at the root of our company, right up through to the president. Our employees deal with customers and operations every day and we need to stay connected and remain nimble to meet the demands of those customers.” Truck-Lite’s global reach is part of our foundation, “…we don’t silo ourselves in terms of region,” Aaron continued, “We don’t have those barriers”.

QUALITY AS STANDARD

Our portfolio of off-road customers has led to products being developed to perform in some of the harshest conditions without dropping performance. Each of our products is put through one of the highest testing-specs in the industry, with up to 15 gruelling examinations: measuring everything from water-resistance and flammability, to dust and particle resistance; as well as being the only unit in the UK equipped to measure photometrics up to 30 metres, with our lab’s state-of-the-art optics and reflex bench. Each test ensures the security of our end-users and maintains the reputation of our customer base. 

Xplore Technologies is a global leader and recognized pioneer in the rugged mobile computing industry with more than 15 years of dedicated focus on developing and deploying fully-rugged wireless tablet systems. Our products have been engineered to meet our customers’ demands for reliable, fully-rugged mobility solutions that deliver superior performance and functionality, and can withstand the most extreme operating environments.  We deliver the most comprehensive and rugged tablet computing solutions in the industry.  Headquartered in the “Silicon Hills” of Austin, Texas, Xplore Technologies has spent more than a decade on research, development and product generation improvements culminating in the 2011 launch of the 5th generation system in the iX104C5™ product family.

The daily challenges faced by our clients in the field and on the front lines were the driving force behind Xplore’s “Voice of the Customer” product development methodology, which drives the engineering, testing and production of critical wireless, performance and expansion capabilities. Since inception, the company has sold approximately one hundred thousand systems globally across a breadth of industries and is a recognized leader and trusted source in the rugged tablet computing industry.

Xplore Technologies Corp. is a publicly-traded company (NASDAQ:XPLR).

Innovative Rugged Mobility Tablet PC Solutions

As demand for the tablet PC has surged, so too has the need for rugged mobility solutions with technology advances that allow greater reach into extreme environments. Xplore customers need mobile computing tools that match tough on-the-job requirements, whether those jobs take them deep underground, high above power lines or to the front line.
Driving rain, blowing sand and dust, temperature extremes, constant vibration, accidental system drops onto hard surfaces – Xplore tablets can go wherever users need to be, providing scalable performance, enhanced connectivity, flexible input methods, true portability and product lifecycles that match program and performance needs.
Xplore’s iX104C5 family of fully-rugged tablet PCs, vehicle/situational docking stations, enabling accessories, and peripherals deliver comprehensive solutions to meet the exacting needs of industrial, commercial and government customers.

XPLORE’s iX104C5 Dual-Mode Sunlight-Readable Tablet PC

Innovative Rugged Tablet For The Real World

Today, more than ever, mobile computing systems are relied upon by an increasingly diverse group of vertical professionals, military and security personnel to do their jobs. Xplore’s customers work in the toughest conditions and trust their tablet computers to be as rugged as they are. Beyond rugged, users demand scalable performance, enhanced connectivity, flexible input methods, true portability and product lifecycles that match their program and deployment needs. Xplore’s iX104C5 delivers with industry-leading ruggedness, performance data protection, meaningful innovation and longer-managed lifecycles.
Xplore’s 5th generation rugged offering enhances user productivity and safety by enabling work in the harshest conditions and by providing reliable operation while mobile in a standing position, vehicle or fork truck-mounted, or at a service desk. IT and program managers enjoy peace of mind in trusting their Xplore systems will operate when and where they need them, with advanced integrated technologies from industry leaders such as Intel® and Microsoft®.

Setting a New Rugged Tablet Computing Standard

• PROVEN RUGGED IN THE REAL WORLD – Industry’s Most Rugged Tablet PC
• XTREME PERFORMANCE – Industry’s Best Performance Platform for Today and Tomorrow
• FIELD-PROVEN DESIGN – Best Sunlight-Readable Dual-Mode Display
• TOTAL CONTROL OF OWNERSHIP – Long Lifecycles, Superior Management Capabilities

XPLORE: Proven Rugged In The Real World

Industry’s most rugged tablet PC

• Independently-tested to MIL-STD-810G, IEC IP67 ingress rating (10-cell battery), and Hazloc standards
• High-density, hardened magnesium alloy chassis with contoured bumper protection system
• Integrated piston gaskets on all user-accessible doors
• 3H hardened display protects against breakage and scratching
• 3rd party tested: 4' drop to concrete with system on; 7' operating drop to non-yielding surface
• Xplore’s Cool Touch thermal system, inclusive of multiple thermistors, regulate heating and cooling in extreme temperatures
• Exceptional data protection – Solid State Drive (SSD) storage, with dual SSD RAID (0,1) option

Military, public safety, field service and other front-line workers depend on their mobile computing systems to complete job tasks, execute mission plans and, in some cases, save lives. System uptime, continued deployed operation and data protection is paramount. Xplore’s iX104C5 is the gold standard in rugged tablet computing, delivering the highest degree of ruggedness in its class. Inspired by first-hand experience and input from utility and telecomm field service workers, military personnel, and law enforcement agencies, the iX104C5 can adapt to changing mission requirements and withstand harsh conditions.

Key Rugged Features Include:

• A drop specification that is more in line with real-life use conditions: 4', operating to concrete (a hard surface) 26x; 7' operating to plywood over concrete
• A unique piston sealing technology enables a higher level of ingress protection (IP-67 with 10-cell battery) from driving rain/snow, blowing dust/sand, and potential immersion in water
• An innovative data protection system utilizes a custom-engineered drive carrier, Solid State drive storage with dual SSD drive option, RAID (0,1) and JBOD array configurations which include advanced high-performance and durable solid state

XPLORE: Xtreme Performance

Industry ’s Best Performance Platform for Today and Tomorrow

• Intel® Core™ i7-620UE mobile processor, HD integrated Intel® graphics with dynamic frequency
• Intel® Turbo Boost Technology
• Up to 8 GB of fast DDR3 memory (Windows® 7, 64-bit OS)
• Multi-modal wireless options, including Intel® Centrino® Wi-Fi, Bluetooth, Gobi™ 3000 Broadband
• Solid State Drive (SSD) for enhanced performance and durability
• Dedicated Fast Track GPS II – 2m and sub-1m models (optional)

The iX104C5 raises the bar for performance in the fully-rugged computing market by providing the most advanced performance platform in its class.
The iX104C5 is equipped with Intel®’s latest Core™ i7-620UE mobile processor, featuring the Intel® QM57 Express chipset, Turbo Boost Technology and integrated high-definition graphics with dynamic frequency.
This powerful mobile dual-core, hyper-threading processor with 4 MB of Smart L2 cache and up to 8 GB2
(Windows® 7, 64-bit OS) of DDR3 system memory supports higher-end applications like GIS mapping and mission planning that require real-time capabilities, fast processing and superior graphics performance to render images.
Multi-modal, integrated wireless options provide communications when and where customers need it.

E-Reg Coatings Ltd is based in Burnley, East Lancashire, and has over 30 years experience in the finishing industry. Providing a complete service including the application of Military, Defence and Specialist paint finishes, as well as industrial powder coatings, we are committed to offering complete customer care and satisfaction. Specialising in Chemical Agent Resistant Coatings (CARC) for over ten years.

Having earned full ISO 9001-2008 accreditation since September 2004, E-Reg Coatings Ltd has a policy of continuous improvement ensuring the best solutions and quality are given to all our clients, whether its large capacity production runs or small on off projects.

All work is processed to the exact specifications and tolerances detailed by our customers and we have a dedicated team to care for every aspect of our services, from initial enquiry and order processing to Inspection and quality assurance. We work closely on all projects with our clients who are based throughout the UK and overseas, ensuring that quality is to the highest standard and that delivery schedules are always met.

Committed to meeting customer needs and expectations, an environment has been established which encourages all employees to focus on, and pursue, continuous improvement in reliability, performance and the quality of products and services.

Examples of Specifications we currently work to:

Chemical Agent Resistant Coatings (CARC)

These finishes are used extensively on military vehicles, communications systems, weaponry and all ancillary equipment. The coating produces a non-porous surface that impedes chemical, radioactive and biological contaminants from penetrating the paint and base materials. CARC resists chemical attack from the aggressive cleaning detergents used for decontamination of the equipment. Coatings offered can include IRR Properties and come in various colours and gloss levels.

US CARC Paint Systems

MIL-DTL-64159B Type II

Two component waterbourne polyurethane Infared Reflective and Chemical Agent Resistant Coating for Military equipment.

MIL-DTL-53039 Type II

Single component moisture cure aliphatic polyurethane which is a camouflage chemical agent resistant coating for military vehicles and equipment.
These coatings are available in the following FED-STD 595 colours:

• Green 383, 34094
• Black 37030
• Brown 383, 30051
• Tan 686A, 33446
• Aircraft Green 34031
• Aircraft Grey 36300

UK MOD CARC Paint Systems Include:

DEF-STAN 80-153 Defence Coating

A single pack, air drying finish with IRR properties used for service vehicles and ancillary equipment

• Colour - Light Stone

DEF-STAN 80-166 Defence Coating

A two pack IRR paint system used for defence equipment which complies with DEF-STAN 00-23 and STANAG 2338

• Colour - NATO Green and Black

We welcome enquiries for other paint systems and will strive to source materials wherever possible. Examples of some other paint systems we regularly use are:

DEF-STAN 208/209

Two pack polyurethane HS low VOC matt / gloss coatings for ground equipment and ancillary items. Satisfies requirements for IRR Camouflage and hydraulic fluid resistance.

MIL-PRF-22750G

This high solids epoxy topcoat is intended for use on the interior of military ground equipment.

• Colours include: Flat Grey, Gloss white and Sea foam green.

DEF-STAN 80-122

Polyester high durability, IRR Powder coating in NATO Green and Tan.

Most paint systems are available upon request.

Quality Control

E-Reg Coatings Ltd holds full  ISO 9001:2008 accreditation and uses fully documented quality procedures. These procedures are adhered to at every stage to ensure all components are pre-treated, coated, inspected and packed in accordance with the customer’s specifications. Sample panels are processed to full spec, alongside components, which are then tested for paint thickness and adhesion, using fully calibrated equipment.

Staff

One of our most valuable assets is our highly skilled and experienced staff. Using their knowledge and expertise they apply a proactive approach to problem solving on the job. Some of our members of staff have over fifteen years experience working with military contracts and specialist specifications.

Investment

By using the most suitable plant, and using first rate materials, we are able to guarantee consistency and quality. We believe that by investing in our equipment, and our work force, we can provide a superior finished product which, in turn, results in satisfied customers and repeat business. Over the years we have heavily invested in plant and equipment to provide in-house facilities to cover all aspects of pre-treatment and processing required for the Military, Defence, Specialist and Industrial sectors.

Capacity and Plant

We currently deal with contracts ranging from one off jobs through to regular, large quantities of small components i.e. over 15,000 components per month.

Our plant consists of:

• 3m x 3m Clean air room with water wash spray booth
• 4m water wash spray booth
• 3m water wash spray booth
• 3 cubic meter Electric Oven
• 5m x 3m x3m Gas fired oven
• 5m double pass gas oven with online conveyor track
• Alocrom pre-treatment plant 900mm x 900mm x 600mm
• 2m x 1.2m Vapour De-greasing plant
• Specialist Masking / De-masking facilities
• 2 x Pad Print Machines
• 2 ton Counter Balance Fork lift truck
• Flat bed transport Collection / delivery facilities
• Sister Company to E-Reg Sheetmetal Fabricators LTD www.eregsheetmetal.co.uk

CEVA Logistics, one of the world’s leading supply chain management companies, designs and implements industry leading solutions for large and medium-size national and multinational companies. Approximately 50,000 employees in more than 160 countries are dedicated to delivering effective and robust supply chain solutions across a variety of sectors where CEVA applies its operational expertise to provide best-in-class services across its integrated network.

The aerospace, aviation and defence market is well known to CEVA  - having had relationships with major manufacturers for over 25 years. We offer very high quality services for this demanding industry especially within handling and security.

CEVA operates a number of dedicated services to the industry with major aerospace and defence manufacturers relying on CEVA to provide:

• Delivery and storage of spare parts, tools, mod-kits
• Customised kitting services
• Bonded and high security warehousing
• Import and export freight movements by Air and Ocean
• Customs clearance provision
• Production and service parts for Mine Resistant Ambush Protected (MRAP)
• Ro/Ro commercial and export licensed vehicles supporting reconstruction
• Service parts supporting military
• Ro/Ro and Airfreight military vehicles for moving on DSP-73 temporary export license.

Our deep understanding of your industry, built on many years' experience, has enabled us to form mutually beneficial partnerships to create specialised and flexible supply chains that reduce risk and costs:

• We help manufacturers improve the flows to and from production lines
• We work with component suppliers to reduce inventory levels and increase availability
• We enable repair and maintenance providers to minimise aircraft downtime.

Working within regulatory guidelines, our focus is always on cost effectiveness and flexibility, so you always get the service and performance you demand.

Building our solutions around our customers' needs, we offer a global infrastructure, competitive pricing and end-to-end visibility through web-based technologies.

For more information, please feel free to also contact:
Mr Phillip Heslop - General Manager Business Development – Aerospace & Defence
CEVA Logistics
CEVA House
Excelsior Road
Ashby-De-La-Zouch
Leicestershire
LE65 1NU
www.cevalogistics.com
+ 44 (0)7500 997863
phillip.heslop@cevalogistics.com